Hycote Engine Enamel Spray Paint - Red - 400ml

No, the Hycote Engine Enamel Spray Paint is a self-priming formula, meaning it can be applied directly to most prepared metal surfaces without a separate primer.

Ideal application temperatures are between 10°C and 30°C (50°F and 86°F). Avoid painting in direct sunlight, high humidity, or when strong winds are present.

Touch dry in approximately 20-30 minutes. It is ready for handling after a few hours, but a full cure, where it reaches maximum hardness and heat resistance, can take 24-48 hours.

While it has excellent heat resistance, it is not specifically rated for the extreme temperatures of exhaust manifolds. For exhaust components, a high-temperature specific paint (e.g., BBQ or exhaust paint) is generally recommended.

Overspray on tools or surrounding surfaces can typically be cleaned with a suitable solvent or thinner while still wet. Once dry, it may require more abrasive methods.

A 400ml can typically covers approximately 1.5 to 2 square meters (about 16-22 sq ft) depending on application thickness and surface porosity.

Yes, the product description states resistance to petrol, oils, and greases, which typically includes brake fluid. However, always test on an inconspicuous area if unsure.

Ensure the nozzle is not clogged. Shake the can vigorously and continuously. If issues persist, try cleaning the nozzle with a solvent or replace the can.

The surface may not have been properly prepared. Ensure it was clean, dry, and free from contaminants. Light abrasion of the surface before painting can improve adhesion.

Applying paint too thickly or from too close a distance can cause runs. Apply in thin, even coats, holding the can approximately 25-30 cm away from the surface. If runs occur, allow to dry and lightly sand, then reapply in lighter coats.

Insufficient shaking of the can or inadequate number of coats can lead to inconsistency. Ensure the can is thoroughly shaken before and during use, and apply multiple thin coats rather than one heavy coat.