Ideal Standard I.life B Basin and Pedestal - Gloss White - 60cm

The product includes the 60cm basin and its corresponding full pedestal. The tap, waste fittings, and any associated plumbing parts are sold separately.

Clean with a soft, damp cloth using mild, non-abrasive soap. Rinse thoroughly and wipe dry to maintain the gloss finish. Avoid abrasive cleaners.

This basin has one tap hole and is designed for a standard single-hole basin mixer tap. Ensure the tap's reach is suitable for the basin's width.

Professional installation by a qualified plumber is highly recommended to ensure correct and safe fitting, and to prevent potential water damage.

The dimensions are Height: 845.0 cm, Width: 600.0 cm, and Depth: 480.0 cm. Please note these measurements are in millimeters (mm), so H:845mm x W:600mm x D:480mm.

No, the tap and waste fittings are not included. These must be purchased separately to complete the installation.

The basin is covered by the manufacturer's lifetime guarantee against defects.

Ensure the pedestal and basin are securely fastened to the wall and each other according to the installation manual. Check that the floor is level.

Check the waste fitting and trap for any blockages. Ensure the waste plug is properly seated and sealed.

This is related to the tap, not the basin. Check the tap's internal seals or consult the tap manufacturer's guide.

For very minor surface scratches, a ceramic repair kit might be used, following the manufacturer's instructions. Deeper chips may require professional assessment.