Best current price£71.26from Amazon
Shopping.co.uk recommended and popular offers
Amazon£71.26Visit shop RIDGID 37098 6-mm Imager Head Accessory with 1-meter Cable, Camera Head, RIDGID SeeSnake Parts, black|grey|white
Visit shop3 offers from £71.26 - £104.79
View price history by clicking the chart icon.
This 6-mm Ridgid Imager Head Accessory is designed for professionals needing to inspect extremely confined spaces. Its primary benefit is its compact size, allowing for detailed visual inspections where standard camera heads cannot reach. A key consideration is its 1-meter cable length, which may limit reach in some applications. Key features include a small 6-mm camera head, 4 bright LEDs for illumination, a flexible 1-meter cable, and a durable aluminum construction.
| Brand | Ridgid |
|---|
The primary advantage is its extremely small diameter, allowing it to access and inspect very confined spaces that larger camera heads cannot reach.
The imager head features 4 bright LEDs designed to provide clear visibility and illumination in dark or dimly lit inspection areas.
No, this accessory is specifically designed for compatibility with select RIDGID inspection systems, including the micro CA-100, CA-300, CA-330, microEXPLORER, and SeeSnake micro series.
The accessory includes the 6-mm imager head with a 1-meter flexible cable, along with three useful attachments: a hook, a magnet, and a mirror.
The imager head is attached to a 1-meter (approximately 3.3 feet) flexible cable.
The product description does not specify if the camera head is waterproof. It is recommended to avoid submerging it in water and to clean it with a damp cloth only, ensuring it is dried thoroughly afterward.
Store the imager head in a clean, dry place, preferably in its protective case or a designated compartment to prevent damage to the lens and cable.
Ensure the imager head cable is securely connected to the RIDGID inspection system. Verify that the inspection system is powered on and that the correct input is selected. Check if the imager head is listed as compatible with your specific model.
Clean the camera lens with a soft cloth. Ensure the LEDs are switched on via the inspection unit controls. Check for any obstructions directly in front of the lens.
Check the imager head cable connection for any damage or loose fittings. Gently flex the cable near the connection point to see if the issue is related to a break. Ensure the cable is not excessively twisted or kinked.
Ensure you are using the correct attachment point on the camera head. Verify that the accessory is fully engaged and clicked into place. Clean any debris from the attachment mechanism.
Setup: To set up the 6-mm Imager Head Accessory, simply connect its cable securely to the compatible RIDGID inspection system. Ensure the connection is firm to prevent signal loss or intermittent display. Once connected, power on your RIDGID inspection unit, and the imager should be recognized automatically.
Compatibility: This imager head is designed for use with the following RIDGID systems: micro CA-100, micro CA-300, micro CA-330, microEXPLORER, and SeeSnake micro systems. Always confirm your specific RIDGID model is listed for guaranteed compatibility.
Care: After each use, gently wipe the camera lens clean with a soft, dry cloth. For stubborn debris, use a slightly damp cloth (water only) and ensure the imager head is completely dry before storage. Avoid exposing the imager head to harsh chemicals, excessive moisture, or extreme temperatures. Store the accessory in its protective case or a designated safe spot to prevent damage to the lens and cable.
