Ener-J Britwall Shower Panel - Light Beige Herringbone Tile Effect - Matte Finish

The panel measures 2400mm in length, 1000mm in height, and 10mm in thickness.

While the panel is waterproof, it is primarily designed for wall applications. For wet room floors, specific flooring solutions designed for constant water exposure and foot traffic are recommended.

Yes, a high-quality, waterproof adhesive specifically designed for PVC panels or similar building materials is required to ensure a strong and durable bond.

This panel is intended as a finished surface and is not designed to be tiled over. Its purpose is to replace traditional tiling.

Clean with a soft, damp cloth and a mild, non-abrasive detergent. Avoid abrasive cleaners or scouring pads to protect the matte finish.

The panel weighs approximately 11.5kg.

No, the panel is not pre-drilled. You will need to carefully measure and cut openings for fixtures like shower heads or taps using appropriate tools.

Ensure the wall surface is completely dry, clean, and free of dust or grease. Use a suitable, high-strength waterproof PVC adhesive and apply it evenly. Allow adequate drying time as per adhesive instructions.

Use a sharp, fine-toothed saw or jigsaw specifically designed for cutting plastic. Clamp the panel securely and make slow, steady cuts to prevent chipping or cracking.

Verify that all edges and joints are properly sealed with a suitable bathroom-grade silicone sealant. Ensure the adhesive has created a complete bond with the wall and panel.

Avoid using abrasive cleaners or tools. Clean gently with a soft cloth and mild soap. For minor scratches, professional PVC repair kits might be an option, but prevention is key.