Best current price£10.58from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£10.58Visit shop Dewalt Power Tools Extreme Flatwood Drill Bit 5063750570334
Visit shop
B&Q£11.26Visit shop - Dewalt Power Tools Extreme Flatwood Drill Bit Multi Colour (20mm X 152mm)
Visit shop9 offers from £10.58 - £12.08
View price history by clicking the chart icon.
This guide is for DIYers and professionals needing fast, clean holes in wood. The DEWALT Extreme Flatwood Drill Bit excels at rapid material penetration and extended drilling life due to its robust design. A potential caveat is its specialized use for wood and wood-like materials, not suitable for masonry or metal.
| Model Part Number | UTTK5758 |
|---|---|
| Brand | DeWalt |
This bit is designed for natural hard and soft wood, chipboard, and other man-made wood materials.
No, this bit is specifically designed for wood applications and should not be used on metal or masonry.
Ensure the cutting spurs are sharp and apply steady, consistent pressure. Drilling at a moderate speed often yields cleaner results.
The lifespan depends on usage frequency and material hardness. The robust shank and cutting spurs are designed for extended drilling life compared to standard bits.
The bit is compatible with standard drill chucks. The required drill power will depend on the diameter of the bit and the density of the wood being drilled.
Clean the bit after each use and store it in a dry place, optionally with a light coating of oil to prevent rust.
Ensure the bit is sharp. Check that the drill speed is appropriate and that the central point is aligned correctly with the material.
Verify that the chamfered cutting spurs are intact. Apply steady pressure and consider a slower drill speed for a cleaner finish.
Reduce drilling speed and allow the bit to cool periodically. Ensure you are not forcing the bit through the material.
Ensure the bit is securely and centrally tightened in the drill chuck. Check the shank for any damage.
Setup: Securely tighten the drill bit in your drill's chuck. Ensure the drill is set to the appropriate speed and mode (rotary drilling, not hammer mode).
Compatibility: Compatible with standard drill chucks. Suitable for use with natural hard and soft wood, chipboard, and other man-made materials. *Not* intended for use with metal, masonry, or concrete.
Care: After use, remove the bit from the drill and clean off any wood dust or debris. A wire brush can be used for stubborn residue. For long-term storage, apply a light coat of oil to prevent rust. Store in a dry place.
