Discover the Smeg KT90GRE Victoria 90cm Wall Extractor Hood in Slate Grey on KDH Electrical. It fe...Discover the Smeg KT90GRE Victoria 90cm Wall Extractor Hood in Slate Grey on KDH Electrical. It features 3 Speeds + Intensive Speed Function to efficiently remove even the strongest odours and LED Lights to illuminate your hob area with efficiently bright lighting.
VICTORIA AESTHETIC
With its nostalgic curvy look, Victoria offers a unique retro-inspired aesthetic featuring chunky controls and signature branding perfect for adding real character to your kitchen. Smeg's Victoria hood is available in 90cm, 100cm and 110cm widths and choice of colourways.
Ducting or re-circulating
Most Smeg hoods offer the choice of ducting or re-circulating, so you can choose your preferred method.
Venting/ducting out provides optimum extraction of cooking fumes by expelling them outside, using a vent kit (available as an optional accessory).
This hood has a 150mm vent outlet, so you can choose between the following options:
SP150 - Simple vent kit for hoods with a 150mm diameter vent outlet
SP150FLAT - Comprehensive vent kit for hoods with a 150mm diameter vent outlet.
Re-circulating extracts the cooking fumes and passes them through active charcoal filters (available as an optional accessory), recirculating the cleaned air back into the room. To find out which charcoal filter your hood needs, see the accessory tab on the hoods specification.
INTENSIVE EXTRACTION
A powerful intensive speed can be selected when quick extraction is needed, whether you’re creating a sizzling stir fry or a preparing an aromatic curry, even the strongest cooking odours will be removed in no time.
LED LIGHTING
These lights are long lasting, save money and perfectly illuminate the work surface below. They can be switched on regardless of the fans, and used simply to create ambience lighting in the kitchen.
This guide helps you understand and use the Smeg KT90GRE Victoria 90cm Wall Extractor Hood. Ideal for home cooks who want an efficient and stylish way to keep their kitchen air clean, this hood offers powerful extraction and a retro design. Note that optimal performance relies on proper installation and maintenance.
All features
Colour
Grey
Energy Efficiency
A
Model Part Number
KT90GRE
Brand
Smeg
Extended Product Information
FAQs
How often should I clean the grease filters?
Clean the grease filters every 2-4 weeks, depending on your cooking frequency.
How do I replace the charcoal filters?
Consult the user manual for the specific filter replacement procedure. Generally, you'll need to remove the filters and install new ones.
What kind of lighting does the hood use?
The hood uses energy-efficient LED lights.
Can I use this hood with a gas hob?
Yes, but maintain a minimum distance of 75 cm between the hob and the hood.
What is the warranty period?
The warranty period is two years.
What is the diameter of the vent outlet?
The vent outlet diameter is 150mm.
How do I switch between speeds?
Use the buttons located on the hood to select the desired speed.
Troubleshooting
Hood is not turning on.
Check the power connection and ensure the outlet is working. Check the fuse or circuit breaker.
Poor extraction performance.
Clean or replace the grease filters. Check for any obstructions in the ducting (if ducted).
Lights not working.
Replace the LED bulbs.
Hood is noisy.
Ensure the hood is correctly installed and that the ducting is properly connected. Reduce the speed setting.
Pros and Cons
Pros
Efficiently removes cooking odors and smoke.
Offers a stylish retro design.
Provides both ducted and recirculating options.
Features energy-efficient LED lighting.
Easy to clean and maintain with removable filters.
Cons
Requires proper installation for optimal performance.
May require additional accessories for certain installations (e.g., vent kit).
Noise level can be high on intensive speed (69 dB).
Limited to 90cm width in this specific model.
Setup, Compatibility & Care
Setup
Installation: The hood must be installed by a qualified professional, adhering to local building codes and the manufacturer's instructions.
Mounting: This is a wall-mounted hood, so ensure the wall is structurally sound and can support the hood's weight.
Ventilation:
Ducted: Connect the hood to a vent leading outside. Ensure the ducting diameter is 150mm. You may need a vent kit.
Recirculating: Install charcoal filters. These filters need to be replaced periodically.
Electrical: Connect the hood to a grounded electrical outlet.
Compatibility
Hob: Suitable for use above electric and gas hobs. Maintain a minimum distance of 65 cm from electric hobs and 75 cm from gas hobs.
Ventilation: Compatible with both ducted and recirculating systems.
Care
Cleaning:
Clean the exterior surfaces with a damp cloth and mild detergent.
Clean the aluminum grease filters regularly. They can be hand-washed or put in a dishwasher.
Replace charcoal filters periodically (every 3-6 months depending on usage).
Maintenance: Regularly inspect the hood for any signs of damage or wear. Ensure all connections are secure.