28 x 5 mm Steel Shelf Support Pins (Suki). Comes in a pack of 4 per shelf. Meets DIN EN 1727.
Best current price£2.69from Amazon
Shopping.co.uk recommended and popular offers
Amazon£2.69Visit shop 28 x 5 mm Steel Shelf Support Pins (Suki), Steel Pin
Visit shop1 offer from £2.69
View price history by clicking the chart icon.
This guide is for anyone building or refitting shelving units. The Suki Hardware Silver Shelf Support Pins offer a reliable and discreet solution for supporting shelves, ensuring stability and a clean aesthetic. A potential caveat is their specific size, requiring precise pre-drilled holes for optimal fit. These pins are designed for standard shelf applications, meeting DIN EN 1727 standards, and come in packs of 4 per shelf.
| Colour | Silver |
|---|---|
| Brand | SUKI HARDWARE |
The shelf support pins are made of steel with a silver finish.
The pins measure 28 mm in length and 5 mm in diameter.
Each pack contains 4 pins, which is the standard amount needed for one shelf.
These pins are designed for standard shelving applications and meet DIN EN 1727 standards for furniture hardware. Load capacity depends on the shelf material, hole integrity, and number of pins used. Avoid overloading.
No, these shelf support pins require pre-drilled holes of the correct diameter (5 mm) for proper installation and support.
The pins have a silver finish.
Yes, they meet DIN EN 1727 standards for furniture hardware.
Verify the pre-drilled hole diameter is exactly 5 mm. If the hole is slightly larger, consider using a shim or a pin with a slightly larger diameter if available.
Ensure all four pins are fully inserted and that the shelf is seated evenly on all supports. Check for any debris in the pre-drilled holes that might be preventing full insertion.
Gently tap the pins with a rubber mallet or the handle of a screwdriver. Ensure the pre-drilled holes are clear of any obstructions or excess material.
Setup: Ensure your shelving material has pre-drilled holes with a diameter of 5 mm. Insert the 28 mm long pins firmly into these holes. Place the shelf onto the inserted pins, ensuring it rests evenly on all four supports.
Compatibility: These pins are designed to meet DIN EN 1727 standards and are compatible with furniture and shelving systems utilizing 5 mm support pin holes. They are suitable for wood, particleboard, and MDF shelving.
Care: To maintain the pins, wipe them with a dry or slightly damp cloth as needed. Avoid abrasive cleaners or solvents, as these can damage the silver finish. Ensure shelves are not overloaded to prevent undue stress on the pins.
