Miniflo White Round 112.5° Offset Downpipe Bend - FloPlast

Name: Miniflo White Round 112.5° Offset Downpipe Bend - FloPlast
Brand: FloPlast
SKU: umzxuxc7ca
Availability: InStock

Offset bends are commonly used to form what is known as a swan neck. This is the term given for tw...

Best current price£4.53from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£4.53Visit shop

B&Q - Miniflo White Round 112.5° Offset Downpipe Bend(Dia)50mm

Visit shop

All Offers

3 offers from £4.53 - £10.20

View price history by clicking the chart icon.

B&QB&Q - Miniflo White Round 112.5° Offset Downpipe Bend(Dia)50mm

Free delivery in 1–3 days

£4.53

Visit shop

Professional Building SuppliesFloplast White Mini Gutter Offset Bend - 112 Degree X 50Mm

Free delivery in 1–3 days

£6.49

Visit shop

eBayFloplast Down Pipe RBM2WH 50mm Miniflo - 112.5 Degree Offset Bend - White

Free delivery in 1–3 days

£10.20

Visit shop

Product Information

Full details

This guide is for anyone installing or maintaining a downpipe system, specifically those using the FloPlast Miniflo White Round 112.5° Offset Downpipe Bend. The key benefit is its ability to create a 'swan neck' configuration, allowing for downpipes to navigate around obstacles. A critical point to remember is to avoid using sealant or solvent weld, as disassembly may be required for cleaning.

All features

Brand	FloPlast

Extended Product Information

FAQs

What is a swan neck?

A swan neck is a configuration created using two offset bends and a short pipe section, allowing the downpipe to move away from the wall to clear an obstruction, then return to the wall.

Can I use sealant or solvent weld with this bend?

No, it is not recommended to use sealant or solvent weld with the FloPlast offset bend. This design allows for disassembly for cleaning.

What material is the bend made from?

The bend is made from a durable plastic designed for outdoor use.

How do I clean the offset bend?

The bend can be cleaned by disassembling it and washing the individual components with water. Avoid using harsh chemicals.

Is this bend compatible with other brands of downpipes?

No, this bend is only compatible with the FloPlast Miniflo range.

How do I install this bend?

The bend is installed by connecting it to the downpipe sections, ensuring a secure fit and alignment, without using any sealant or solvent weld.

What is the angle of the offset bend?

The offset bend has a 112.5° angle.

Troubleshooting

Water leaking from the joints.

Check the connections between the bends and the downpipes. Ensure the fittings are properly aligned and securely connected. If the leak persists, consider replacing the components, ensuring the system is clean and free of debris.

Blockage in the downpipe system.

Remove the offset bend and any connected pipes. Flush the system with water. Reassemble the bend and pipes after cleaning.

Pros and Cons

Pros

Enables the creation of swan necks to navigate around obstructions.
Provides a clean, finished look with its white color.
Durable and weather-resistant, ensuring longevity.
Easy to install within compatible systems.
Facilitates easy maintenance and cleaning due to its design.

Cons

Requires another bend and a small pipe section to complete a swan neck.
The white color may show dirt or stains more easily than other colors.
Cannot be solvent welded or sealed, potentially reducing the overall joint strength.
Specific to the Miniflo range, limiting its use with other brands.