Chicago Pneumatic Die Grinder - CP875
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the Chicago Pneumatic CP875 die grinder, a compact and powerful tool designed for precision work in tight spaces. Its 90-degree angle head and high-speed operation make it ideal for tasks like smoothing and deburring. Note that optimal performance requires a consistent air pressure supply.
All features
| Model Part Number | CP875 |
|---|---|
| Brand | Chicago Pneumatic |
Extended Product Information
FAQs
What type of air compressor is required?
The CP875 requires an air compressor capable of delivering 90psi and between 4-5.5 CFM.
What size collets does it use?
The CP875 is compatible with both 1/4-inch and 6mm collets.
How do I change the accessories?
Loosen the collet nut using the appropriate wrench, insert the accessory, and tighten the collet nut securely.
What safety precautions should I take?
Always wear eye protection and other appropriate safety gear. Ensure the work area is clear before operation. Never direct the exhaust towards yourself or others.
How should I store the tool?
Store the tool in a clean and dry environment. Disconnect it from the air supply when not in use.
How do I maintain the tool?
Regularly clean the tool with a dry cloth. Inspect the collets and replace if worn. Avoid using solvents.
What is the tool's air consumption?
The tool consumes between 4-5.5 CFM.
Troubleshooting
The tool doesn't start.
Check the air supply connection and ensure the air compressor is turned on and delivering sufficient pressure (90psi).
The tool runs slowly or lacks power.
Check the air pressure and air supply. There might be a blockage in the air lines. Ensure the air compressor is providing sufficient CFM.
The accessory is not securely held.
Ensure that the correct collet is installed and tightened properly. Inspect the collet for wear and replace if necessary.
Pros and Cons
Pros
- Compact design for use in tight spaces.
- High-speed operation for efficient material removal.
- Ergonomic handle for comfortable use.
- Safety features like the lock-off throttle.
Cons
- Requires an air compressor for operation.
- Air consumption of 4-5.5 CFM may require a larger compressor for sustained use.
- Limited to applications that require the use of compatible collets and accessories.
Setup, Compatibility & Care
- Air Supply: The CP875 requires a compressed air supply of 90psi. Ensure your air compressor can deliver between 4-5.5 CFM. Use a quality air hose with appropriate fittings to connect the tool to the air supply.
- Collet and Accessory Selection: Choose the correct collet size (1/4-inch or 6mm) to match your chosen grinding or polishing accessory.
- Operation: Before starting, ensure the work area is clear of obstructions. Wear appropriate safety gear, including eye protection. Direct the exhaust away from your body. Start the grinder and apply light pressure.
- Maintenance: Regularly clean the tool with a dry cloth. Avoid using solvents. Periodically inspect the collets and replace if worn. Always disconnect from the air supply before performing maintenance.