Bartoline Ready Mixed Filler - 600g - White

Yes, Bartoline Ready Mixed Filler is suitable for use on timber surfaces.

Sanding is often unnecessary as the filler dries smooth. However, you can sand it lightly if needed to achieve a perfect finish.

Yes, but it must be sealed with paint or varnish after it has dried to protect it from the weather.

Drying time depends on the depth of the fill and environmental conditions. Allow at least several hours or overnight for complete drying.

Store in a cool, dry place and ensure the container is tightly sealed to prevent it from drying out.

Yes, once the filler is completely dry, you can paint directly onto it.

You can use it on plaster, plasterboard, brick, stone, and timber.

Use a filling knife or a similar tool to apply the filler and smooth it over the damaged area.

Apply the filler in thinner layers. Multiple thin layers are better than one thick layer. Ensure the surface is properly prepared.

Ensure the surface is clean and free of dust or grease. Lightly sand the surface to improve adhesion.

Use a damp filling knife to smooth the surface. Apply light pressure and work in one direction.