Sealey Baridi Ice Cube Maker - LED Display - 10 Minute Freeze

The Sealey Baridi Ice Cube Maker can produce ice in as little as 10 minutes.

The machine can produce up to 12kg of ice in a 24-hour period.

No, this is a portable unit that does not require any plumbing or drainage. You simply fill the water tank manually.

Yes, you can select between two ice cube sizes, large or small, using the electronic control panel.

Clean the interior with a soft, damp cloth and warm water. For more thorough cleaning, a mild detergent can be used, followed by rinsing. Avoid abrasive cleaners. Ensure the unit is dry before storage.

Ensure the ice full indicator light is illuminated. If it continues to run, unplug the unit immediately and check that the ice basket is correctly positioned and not obstructed. Consult the troubleshooting section if the issue persists.

The water tank has a capacity of 2.1 liters, and the ice basket can hold up to 1.3 liters of ice.

Ensure the power cord is securely plugged into a working outlet. Check if the main power switch is on. Verify that the water tank is adequately filled.

Check the water level in the tank; refill if low. Ensure the ice basket is not completely full, triggering the auto-stop. Verify that the ambient temperature is not excessively high, which can affect performance. Clean any potential obstructions in the ice chute.

Ensure the correct cube size setting is selected. Check if the water tank needs refilling, as low water levels can affect cube formation. Allow the unit to reach optimal operating temperature.

Ensure the water tank is properly seated and filled. Check the ice basket; remove excess ice if it's preventing the sensor from functioning correctly. Clean the sensors if they appear dirty.

Ensure the unit is on a stable, level surface. Some operational noise is normal, but loud rattling could indicate an issue; check for any loose parts or obstructions within the unit (unplug before inspecting).