Best current price£8.25from Amazon
Shopping.co.uk recommended and popular offers
Amazon£8.25Visit shop Abb Pin Phase Rail 3-Phase Ps3/12 Per M Compact Can Be Cut To Length 10 Mm² 12 Division Units For Circuit Breakers
Visit shop4 offers from £8.25 - £17.48
View price history by clicking the chart icon.
This ABB System pro M compact comb rail is designed for electricians and installers in residential and commercial settings needing to connect multiple circuit breakers efficiently. Its key benefit is providing a structured and secure way to link up to 4 devices with a 10mm² cross-sectional area and a 63A rated current. A potential consideration is its 3-pin connection, which might require specific wiring configurations.
| Colour | Grey |
|---|---|
| Model Part Number | 2CDL230001R1012 |
| Brand | ABB |
This comb rail is designed to accommodate up to 4 devices.
The comb rail supports conductors with a cross-sectional area of up to 10mm².
The rated continuous current is 63A.
While it is designed for ABB System pro M compact circuit breakers, compatibility with other brands is not guaranteed and should be verified based on physical dimensions and terminal standards.
This comb rail is intended for use within electrical enclosures and is not designed for direct outdoor exposure without appropriate protection.
The 3-pin connection typically refers to its suitability for 3-phase power systems or specific wiring configurations that utilize three main power conductors.
Consult the ABB installation manual for the specific torque values. Using a calibrated torque screwdriver is recommended for accurate tightening.
Ensure the breaker is aligned correctly and pushed firmly until it snaps into place. Check for any obstructions on the rail or breaker mounting points.
Verify that the conductors are properly stripped and inserted fully into the terminals. Ensure the terminal screws are tightened to the recommended torque specification. Check if the connected load exceeds the 63A rating.
Re-tighten all terminal screws. If the issue persists, the conductor or terminal may be damaged and require replacement.
Check all connections along the comb rail and from the rail to the devices. Ensure the incoming power supply is stable and within expected parameters.
Setup:
Compatibility:
Care:
