Freud Router Bit - Double Flute Straight - Carbide

The Perma Shield Coating is a non-stick feature that prevents resin adhesion, significantly reducing downtime required for cleaning and protecting the bit from corrosion.

This bit is designed to cut through all composition materials, plywood, hardwood, and softwood.

Yes, the end of the bit has relief which allows for fast and clean plunging operations, though its 9.5mm diameter suits specific plunging needs.

TiCo Carbide is a specially formulated, highly compact Titanium Cobalt Carbide engineered by Freud. It provides a sharper edge, a flawless finish, and dramatically longer cutting life compared to standard carbide.

The maximum recommended RPM for this bit is 24,000 revolutions per minute.

No, this bit is specifically designed for cutting wood and wood composite materials; it is not suitable for metal.

The shank diameter of this router bit is 1/4 inch (6.35mm).

Ensure the bit is sharp (replace if dull), reduce router feed rate, increase router speed (if possible within RPM limit), and ensure the material is securely clamped.

Reduce feed rate, increase router speed (if safe), or take shallower passes. Check for resin buildup on the bit.

Ensure the bit is seated correctly and fully in the collet. Check that the collet is clean and free of debris. Verify the bit is not bent.

Ensure the bit is being cleaned regularly with appropriate cleaners. Resin buildup can occur if cleaning is neglected.