Best current price£0.98from Scan Computers
Shopping.co.uk recommended and popular offers
Scan Computers£0.98Visit shop Cables Direct Xclio Cat6 Snagless Moulded Gigabit Ethernet Cable Rj45 0.25M Black Ert-600-Hk
Visit shop
B&Q£3.42Visit shop B&Q - Ethernet Network Cable Cat6 Gigabit Rj45 Copper Internet Patch Lead White 0.25M
Visit shop51 offers from £0.98 - £13.30
View price history by clicking the chart icon.
This guide is for individuals and small businesses needing reliable, high-speed network connections. The Cables Direct ERT-600Y Cat6 cable offers enhanced performance for Gigabit Ethernet, ensuring faster data transfer with reduced interference. A potential limitation is its short 0.5-meter length, which may require extension or different cable lengths for certain setups. Key features include its Cat6 standard, UTP (Unshielded Twisted Pair) design, and 250 MHz bandwidth support.
| Series | Cat6 |
|---|---|
| Model Part Number | ERT-600Y |
| Brand | Cables Direct |
Cat6 cables offer significantly better performance than Cat5e cables, supporting higher frequencies (250 MHz vs 100 MHz) and providing more stringent specifications for crosstalk and system noise, leading to faster and more reliable data transmission, especially for Gigabit Ethernet.
While Cat6 cables can technically support runs up to 100 meters, this specific 0.5-meter cable is intended for very short connections. For a 10-meter run, you would need a different, longer Cat6 cable.
No, this is a UTP (Unshielded Twisted Pair) cable. It offers good performance for most standard applications but is less resistant to electromagnetic interference (EMI) compared to shielded cables (STP).
24AWG refers to the wire gauge, indicating the thickness of the conductor. A lower AWG number means a thicker wire, which generally offers lower resistance and better signal quality. 24AWG is standard for Cat6 patch cables.
You can connect any standard networking devices with RJ-45 ports, including computers, laptops, routers, switches, modems, gaming consoles, smart TVs, and network printers.
Yes, Cat6 cables are backward compatible and will work with older network standards like 10/100 Mbps. However, you will only achieve speeds supported by the slowest device in the connection.
Ensure both RJ-45 connectors are fully seated and have clicked into place on both the device and the network source. Test with another known working network cable or try a different port on your equipment.
Check for damage to the cable, such as kinks or cuts. Ensure the cable is a Cat6 standard cable and that your network devices support Gigabit Ethernet. Verify that the cable is not exceeding its maximum recommended length for optimal performance, even though this is a short cable, ensure it's not bundled too tightly with power cables which can cause interference.
Inspect the cable for any signs of wear or damage. Ensure the connectors are clean and properly inserted. Try a different Cat6 cable to rule out a faulty cable. Check for potential sources of electromagnetic interference near the cable run.
Setup:
Compatibility:
Care:
