Abru L Bracket - Silver Effect

This L bracket is great for strengthening shelving, wooden furniture and picture frames. The produ...

Best current price£2.95from B&Q

One Offer

1 offer from £2.95

View price history by clicking the chart icon.

B&QB&Q - Silver Effect Powder-Coated Steel Angle Bracket (H)12mm (W)75mm (L)75mm
Free delivery in 1–3 days
£2.95
Visit shop

Product Information

Full details

This Abru L bracket in a Silver Effect finish is designed for DIY enthusiasts and homeowners needing to reinforce joints in wooden furniture, shelving, and picture frames. Its primary benefit is providing robust structural support to prevent sagging or separation. A key consideration is that it requires separate screw fixings, which are not included. This bracket offers reliable strengthening for various home improvement projects.

All features

ColourSilver
BrandAbru

Extended Product Information

FAQs

What size screws should I use?

The appropriate screw size depends on the thickness of the material you are joining. Typically, screws between 15mm and 30mm in length with a suitable diameter for wood are recommended. Always ensure the screw penetrates well into both pieces being joined.

Are screws included with the bracket?

No, screws are not included with the Abru L Bracket. You will need to purchase suitable screws separately based on your specific application.

Can this bracket be used on metal or plastic?

While primarily designed for wood, it may be possible to use this bracket on other materials if appropriate fixings are available and the material is strong enough to support the load. However, its effectiveness is best proven with wood.

How many brackets do I need for one shelf?

For most standard shelves, at least two brackets per shelf (one at each end) are recommended for stability. For longer or heavier shelves, consider adding intermediate brackets for additional support.

What is the finish of the bracket?

The bracket has a 'Silver Effect' finish, which is a metallic look designed to be discreet.

Can I paint or re-finish the bracket?

While possible, the silver effect finish is generally durable. If you choose to paint it, ensure proper surface preparation for adhesion.

Troubleshooting

Bracket feels loose after installation

Ensure you are using screws of adequate length and diameter for the material. Check that the bracket is flush against both surfaces and that all screws are tightened securely. Consider using wood glue in conjunction with the bracket for maximum strength.

Wood splitting when screwing

Pre-drill pilot holes that are slightly smaller than the screw diameter. Ensure you are not overtightening the screws, which can strip the wood.

Bracket does not fit the desired angle

This is a fixed-angle bracket. For angled joints, alternative solutions or multiple brackets may be required. Measure your application carefully before purchase.

Pros and Cons

Pros

  • Provides significant reinforcement to wooden structures.
  • The silver effect finish is discreet and fits with most decor.
  • Suitable for a wide range of DIY and repair projects.
  • Helps extend the lifespan of furniture and shelving.

Cons

  • Screws for mounting are not included and must be purchased separately.
  • The bracket itself has a fixed size, limiting its use for very large or uniquely shaped items.
  • Primarily designed for wood; performance on other materials may vary.

Setup, Compatibility & Care

Setup:

  1. Identify the joint or corner requiring reinforcement.
  2. Position the L bracket flush against both surfaces.
  3. Mark the screw hole locations on both the bracket and the material.
  4. Pre-drill pilot holes if necessary, especially in harder woods, to prevent splitting.
  5. Secure the bracket using appropriate screws (not included). Ensure screws are long enough to provide a strong hold but not so long that they pass through the material.

Compatibility:

This L bracket is primarily designed for use with wood and wood-based materials like particleboard or MDF. It is suitable for furniture, shelving units, picture frames, and other general DIY applications.

Care:

Wipe clean with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which could damage the silver effect finish. For exterior use or in damp environments, consider using rust-resistant screws to prevent corrosion around the bracket.

Price History

DatePrice
Visit shop