Best current price£33.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£33.00Visit shop B&Q - Zinc Effect Galvanised Steel Heavy Duty Angle Bracket (H)90mm (W)59mm (L)90mmPack Of 20
Visit shop1 offer from £33.00
View price history by clicking the chart icon.
This Expamet Heavy Duty Angle Bracket in Silver is designed for DIYers and tradespeople needing to reinforce 90-degree joints in timber structures. Its primary benefit is providing robust structural support that resists rust, ensuring long-term stability. A potential caveat is its specific use case for timber and its gauge may not be suitable for extremely heavy loads without additional reinforcement.
| Colour | Silver |
|---|---|
| Brand | Expamet |
The bracket is made from galvanised steel, which is known for its strength and resistance to rust.
Its primary use is to join pieces of timber together at a 90-degree angle, providing structural support.
No, screws or nails are not included. You will need to provide your own appropriate fasteners.
Yes, the galvanised steel construction makes it suitable for outdoor use as it resists rusting.
The number of holes may vary slightly, but typically it has multiple holes on each leg to allow for secure fastening into both pieces of timber.
This bracket is specifically designed for joining timber. Its effectiveness and suitability for other materials are not guaranteed.
The 'heavy duty' designation refers to its robust construction, designed to provide significant reinforcement and support for timber joints compared to lighter-duty brackets.
Ensure the timber surfaces are flat and free from debris. Check for any imperfections on the bracket itself.
Pre-drilling pilot holes in the timber can make insertion easier and prevent wood splitting. Ensure you are using the correct size and type of fastener for the timber.
While galvanised steel is highly rust-resistant, severe damage to the coating could expose the metal. Inspect for deep scratches or damage. Small surface rust spots may indicate minor damage; clean with a wire brush and consider applying a suitable metal paint for protection if extensive.
Verify that enough fasteners have been used, with at least two into each piece of timber. Ensure fasteners are securely tightened. Consider if additional bracing or a larger bracket is needed for the load.
Setup: To install the Expamet Heavy Duty Angle Bracket, align it with the two pieces of timber you wish to join at a 90-degree angle. Ensure the bracket sits flush against both surfaces. Secure the bracket by driving appropriate screws or nails through the pre-drilled holes into the timber. Use fasteners that are suitable for the type and thickness of the timber being used, and ensure they are long enough to provide a strong hold without splitting the wood. For optimal strength, use fasteners in all available holes.
Compatibility: This angle bracket is designed primarily for use with timber. It is compatible with most common timber types. Ensure the timber is dry and free from rot for best results. It can be used for both interior and exterior applications.
Care: The galvanised coating provides excellent rust resistance. For general care, simply wipe the bracket clean with a dry or slightly damp cloth if it becomes dusty. Avoid using abrasive cleaners or solvents, as these could damage the protective coating. If the bracket is used outdoors, periodically check for any signs of damage to the galvanised finish and address them if necessary, although the robust nature of the galvanisation means this is rarely required.
