Bontrager Pro Flat Pack - CO2 Inflator

Typically, one 16g CO2 cartridge is sufficient to inflate one road bike tire to a usable pressure. For mountain bike tires, it may provide partial inflation or require two cartridges for full inflation.

No, CO2 cartridges are single-use and must be replaced after inflation.

The sleeve protects your hand from extreme cold generated when the CO2 gas rapidly expands and cools during inflation.

The pack has small pockets for ID, money, and keys. A smartphone may fit depending on its size, but it's primarily designed for smaller essentials to maintain a low profile.

This kit does not include tire levers. It is recommended to carry a separate set of tire levers for removing the tire from the rim.

Store the patch kit in a cool, dry place, away from direct sunlight and extreme temperatures, to preserve the adhesive on the patches.

The Air Rush Elite CO2 inflator is designed to work with both Presta and Schrader valves. Please ensure you have the correct head configuration for your valve type.

Ensure the CO2 cartridge is screwed in fully and the inflator head is properly seated on the tire valve. Check that the cartridge is not empty or damaged.

Verify the inflator mechanism is functioning correctly. Ensure the valve is open on the inner tube and the inflator head is securely attached.

Thoroughly clean and roughen the tube surface around the puncture with the provided sandpaper or abrasive. Ensure the patch is applied firmly and evenly, and allow adequate curing time before inflation.

Ensure the zipper is fully functional. The stretch neoprene might require a firm pull to open; try gripping the zipper tab firmly.