Best current price£12.97from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£12.97Visit shop Timco Gasket And Mitre Shears
Visit shop
B&Q£20.69Visit shop B&Q - Gasket & Mitre Shears8In
Visit shop2 offers from £12.97 - £20.69
View price history by clicking the chart icon.
The Timco Gasket and Mitre Shears are designed for professional installers and DIY enthusiasts who require precision when cutting rubbers, plastics, and thin mouldings. These shears excel at delivering clean, accurate mitre cuts, though they are specifically engineered for materials up to 15mm thick and are not intended for heavy-duty metal or thick timber applications.
| Model Part Number | TIMMITRESHEARS |
|---|---|
| Brand | TIMCO |
No, these are designed specifically for rubbers, plastics, and thin mouldings up to 15mm. Attempting to cut wood will likely damage the blade.
Yes, the tool is designed with a replaceable SK2 steel blade to ensure a long service life.
The shears are engineered to handle materials up to 15mm thick.
These shears are not intended for metal. Using them on metal will dull or break the blade instantly.
The angle guides are fixed to the base plate for standard 45 and 90-degree cuts. No calibration is required, but you should ensure the material is seated flush against the guide before cutting.
Keep the blade clean and free of adhesive residue, occasionally oil the pivot point, and store in a dry environment to prevent rust.
The blade is likely dull or chipped. Inspect the SK2 blade and replace it with a new one.
Check the central pivot bolt for proper tension. Ensure it is tightened adequately to hold the blade alignment without restricting movement.
Ensure the material is pressed firmly against the base plate's fence and is not thicker than the 15mm maximum capacity.
To begin, ensure the base plate is clean of debris, as particles trapped between the material and the plate can affect cut precision. The shears are compatible with a wide range of soft-to-medium hardness materials like rubber gaskets and plastic mouldings. To maintain the tool, wipe the SK2 steel blade with a light machine oil after use to prevent corrosion, especially if working with damp materials. If the cutting action becomes sluggish or leaves frayed edges, verify that the blade pivot is not too loose, or replace the blade if the edge has become dull from frequent contact with harder plastics.
