Liff Water Filter Cartridge - CR10
Best current price£36.94from Amazon
Best offers
Shopping.co.uk recommended and popular offers
Amazon£36.94Visit shop Bwt Cr10 10" Carbon & Resin Cartridge
Visit shopAmazon£36.94Visit shop One Offer
1 offer from £36.94
View price history by clicking the chart icon.
Product Information
Full details
The Liff CR10 water filter cartridge is designed for homeowners and professionals using standard 10-inch water filter housings, such as the Liff NP1 or NDL2 models. It provides a reliable solution for improving water clarity and quality by filtering out impurities at a consistent flow rate of 4 litres per minute. While it offers excellent filtration for standard residential needs, users must note that it requires a maintenance schedule of replacement every 3 to 6 months to prevent pressure drops or bacterial buildup.
All features
| Model Part Number | CR10 |
|---|---|
| Brand | Liff |
Extended Product Information
FAQs
Will the CR10 fit a non-Liff filter housing?
Yes, the CR10 is designed to fit any standard 10-inch water filter housing.
How do I know when to replace the cartridge?
You should replace the filter at least every 3 to 6 months or sooner if you notice a drop in water pressure.
Can this filter be used with hot water?
No, the maximum operating temperature is 45 degrees Celsius. It should not be used on hot water lines.
What is the filter capacity of the CR10?
The cartridge has a filter capacity of approximately 1500 litres.
Does this filter remove all contaminants?
The CR10 is designed for standard filtration. If you have specific concerns about chemicals or bacteria, check the technical specifications for the specific filtration media.
Troubleshooting
Reduced water flow from the tap
The filter is likely clogged with trapped sediment and requires a replacement.
Water leaking from the housing
Check that the filter is seated correctly inside the housing and that the housing O-ring is clean and properly lubricated.
Cloudy water after installation
Flush the system with cold water for 5 to 10 minutes to remove loose carbon fines or manufacturing dust.
Pros and Cons
Pros
- Compatible with industry-standard 10-inch filter housings
- Balanced flow rate suitable for most kitchen or utility taps
- Easy to install without specialized tools
- Reliable performance up to 1500 litres
Cons
- Requires frequent replacement every 3-6 months
- Not suitable for high-temperature water lines above 45 degrees Celsius
- Capacity may vary based on incoming water quality
Setup, Compatibility & Care
To install the CR10, ensure the water supply to the filter housing is turned off. Unscrew the housing bowl, remove the exhausted filter, and clean the housing interior to remove any sediment buildup. Insert the new CR10 cartridge, ensuring it is properly centered, and tighten the housing bowl firmly by hand. To maintain performance, replace the cartridge every 3 to 6 months. If you live in an area with high sediment or hard water, you may need to replace the filter more frequently than the 6-month threshold to avoid damage to the housing seals or reduced flow.