Best current price£24.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£24.99Visit shop - 4 Port Zone Speaker Selector Splitter Switch50W 8 OhmAudio Distribution Box
Visit shop3 offers from £24.99 - £25.49
View price history by clicking the chart icon.
This guide is for anyone looking to expand their audio system by connecting multiple speaker pairs to a single amplifier. The Loops 4 Port Zone Speaker Selector allows you to distribute sound to up to four sets of speakers from one amplifier, with individual on/off switching for each zone, offering flexible room-by-room audio control. A slight volume drop per speaker is normal when multiple pairs are active, and the unit is designed for amplifiers up to 50 watts per channel.
| Colour | Black |
|---|---|
| Model Part Number | Way-Speakers-Music-Home-Cinema-Amplifier-Amp |
| Brand | Loops |
This splitter is designed and optimized for 8 ohm speakers. While it might function with 4 ohm speakers, it is not recommended as it could potentially overload your amplifier and lead to performance issues or damage.
The splitter can be used with amplifiers outputting up to 50 watts in total per channel.
No, the Loops 4 Port Zone Speaker Selector is a passive device and does not require any external power source to operate.
When you connect multiple speaker pairs to a single amplifier channel, the amplifier's power is divided among those speakers. This means each individual speaker will receive less power, resulting in a slightly lower volume compared to using just one pair.
The splitter features spring clip terminals. Simply push the clip, insert the bare end of your speaker wire, and release the clip to secure the connection. Ensure correct polarity (+/-) for each speaker.
Yes, as long as your home theater receiver has standard speaker outputs (typically L/R for stereo) and its output per channel does not exceed 50 watts. You would connect the receiver's front L/R speaker outputs to the splitter's input.
The dimensions of the splitter are 170mm in width, 47mm in height, and 117mm in depth.
Check that the amplifier is powered on and volume is up. Verify that the speaker wires are correctly connected to both the amplifier and the splitter, ensuring proper polarity (+/-) at each connection point. Confirm the amplifier's output is connected to the splitter's input.
Ensure the desired speaker zone on the splitter is switched to the 'on' position. Check the wiring for the silent speaker pair, verifying connections and polarity. Test the problematic speaker pair directly with the amplifier if possible to rule out speaker failure.
This is normal to a degree when multiple speaker pairs are active. However, if the volume is excessively low even with a single zone active, check the amplifier's power output (ensure it's within the 50W per channel limit) and confirm that quality speaker cable is being used. Ensure the amplifier's volume is turned up.
Check for loose connections at the splitter and speakers. Ensure the amplifier's output does not exceed the 50W per channel limit, as this can cause distortion and damage. Try using a different amplifier if possible to isolate the issue.
Setup:
Compatibility:
Care:
