Best current price£6.44from Amazon
Shopping.co.uk recommended and popular offers
Amazon£6.44Visit shop MYPURECORE MDPE Compression Fitting 20-50mm – Straight, Elbow, Tee, Stop End & Valve – BSP Threaded Water Pipe Connector – Leak-Proof Irrigation for Blue Pipe (Stop End 25mm)
Visit shop4 offers from £6.44 - £10.44
View price history by clicking the chart icon.
The Mypurecore 25mm MDPE Compression Stop End is designed for DIY enthusiasts, professional plumbers, and agricultural contractors who need a reliable, leak-proof way to seal the end of a 25mm MDPE water supply line. It offers the benefit of a tool-free, secure connection that withstands up to 10 bar of pressure, making it ideal for irrigation and water supply systems; however, users should ensure the pipe ends are cut perfectly square to guarantee the integrity of the watertight seal.
| Model Part Number | MDPEVS001 |
|---|---|
| Brand | Mypurecore |
Yes, it is designed for standard 25mm MDPE piping commonly used in water supply and irrigation.
No, this is a compression fitting. It relies on an internal O-ring and compression ring to create a seal, so tape is unnecessary.
While the fitting body is durable, the compression ring often deforms to grip the pipe. It is recommended to use a new fitting if you have to re-plumb the connection.
The stop end is rated for a maximum pressure of 10 bar.
This product is primarily designed for cold water supply and irrigation systems; please check your specific application temperature requirements.
Ensure the pipe is cut square, free of debris, and inserted fully past the internal O-ring. Tighten the nut further by hand.
Loosen the compression nut completely to allow the internal ring to expand. Check for obstructions or pipe deformation.
To install, ensure the 25mm MDPE pipe is cut cleanly and square. Remove any burrs from the cut edge to prevent damaging the internal O-ring. Loosen the compression nut on the stop end, push the pipe firmly into the fitting until you feel it hit the internal stop, then hand-tighten the nut securely. For care, avoid using abrasive chemical cleaners on the exterior. If you need to uninstall the fitting, be aware that the compression ring may leave a permanent groove on the pipe, meaning that section of the pipe should be trimmed if you decide to reuse the connection elsewhere.
