Bosch SDS plus-5X Hammer Drill Bit - Dia 7mm L 160mm

You need an SDS Plus hammer drill to use this drill bit.

This drill bit is specifically designed for masonry applications and may not be suitable for wood or metal.

Simply insert the bit into the SDS Plus chuck and push it in until it locks. It should click into place.

This drill bit is designed for durability, but you may need to replace it when it becomes dull or damaged. Regular inspection is recommended.

Always wear safety glasses and a dust mask. Ensure the work area is clear and free of obstructions. Use the drill at the appropriate speed for the material.

Clean the drill bit with a brush or cloth to remove any debris and store it in a dry place.

This drill bit has a diameter of 7mm.

Check if the drill is set to hammer mode. Ensure the bit is sharp; replace if necessary. Apply appropriate pressure, but avoid forcing.

Stop the drill and reverse the rotation to release the bit. If the bit is still stuck, gently rock it back and forth while pulling it out.

Reduce the drilling speed. Allow the bit to cool down periodically. Ensure proper lubrication (if applicable) for the material being drilled.