OX Tools MS3 Maestro Metal 3 Core & Accessories Case

This kit is suitable for cutting most building materials, including semi-engineering bricks, clay products, and limestone aggregate concrete.

The kit includes 3 dry cores (38mm, 52mm, and 117mm), 1 aluminum case, 1 hex adaptor, 1 SDS Adaptor, 1 drift key, 1 12mm guide rod, 1 13mm a taper drill, and 1 1/2 BSP 250mm solid extension +A taper.

After use, clean the cores to remove debris. Store them in the provided case to prevent damage.

Use the appropriate adaptor (hex or SDS) included in the kit. Securely attach the adaptor to your drill's chuck, then attach the core to the adaptor.

Start with a slower speed, then gradually increase it based on the material you are drilling. Avoid excessive speed to prevent overheating.

Stop drilling immediately. Use the drift key to carefully remove the core. Avoid forcing the core, which may damage the tool or the material.

Yes, this kit is suitable for cutting limestone aggregate concrete.

No, this kit is designed for dry core drilling only.

Check the core for wear and tear. Ensure you are using the correct speed and pressure for the material. Replace the core if it is damaged or worn.

Verify the adaptor type and size are compatible with your drill. Check the drill chuck type and consult the drill's manual. Consider using a different adaptor if necessary.

Reduce drilling speed. Apply intermittent breaks to allow the core to cool. Ensure the core is sharp and suitable for the material.