Sievert Promatic Large Field Burner - 600mm - 102kW

This burner requires a standard propane gas supply.

Yes, this burner is designed for use with the Sievert Promatic handle system, specifically models like the PRMS3366.

The 102kW output and 600mm burner are designed for large-area coverage, significantly speeding up roofing membrane application compared to smaller burners. Specific coverage rates depend on the roofing material and application technique.

While powerful, its large size and high output are optimized for large fields. For very small or delicate repairs, a smaller burner might be more appropriate to avoid overheating.

Always use in a well-ventilated area, wear appropriate personal protective equipment (including heat-resistant gloves and eye protection, and hearing protection due to the 86 dBA sound rating), perform leak checks, and keep flammable materials away.

Allow the burner to cool completely. Clean the nozzle with a soft brush. Store in a dry place. Regularly inspect hoses and connections for wear.

The sound rating is 86 dBA, which necessitates the use of hearing protection during operation.

Check gas supply, ensure the cylinder valve is open, verify connection to the Promatic handle, and confirm the automatic ignition mechanism is functioning correctly. Ensure the gas flow is adequate.

Check for gas blockages in the nozzle or hose. Ensure the gas cylinder is not empty and the regulator is set correctly. Clean the burner nozzle.

Immediately turn off the gas supply at the cylinder. Do not use the burner. Inspect all connections for tightness and damage. Use a soapy water solution to check for leaks before re-attempting to use.

Turn off the gas supply immediately. Allow the unit to cool completely. Inspect for obstructions or damage. Contact Sievert support if the issue persists.