Solid Oak Flooring Ramp Threshold - Unfinished - 20mm - 2.44M

This unfinished solid oak flooring profile creates a smooth transition between flooring surfaces o...

Best current price£24.99from Robert Dyas

All Offers

2 offers from £24.99 - £98.99

View price history by clicking the chart icon.

Robert DyasSignature Collection Oak Ramp 7Mm Unfinished 90Cm, Brown
£2.95 delivery
£24.99
Visit shop

Product Information

Full details

The Signature Collection Solid Oak Flooring Ramp Threshold is an ideal solution for DIY enthusiasts and flooring professionals looking to bridge the gap between surfaces of varying heights, such as wood floors meeting tile or carpet. Its primary benefit is the ability to create a smooth, trip-resistant transition that can be customized to match any existing decor, though the caveat is that it arrives unfinished and requires additional sealing, staining, or lacquering before installation.

All features

Model Part NumberMOR2050
BrandSignature Collection

Extended Product Information

FAQs

Can I use this with underfloor heating?

Yes, but ensure you allow for the natural movement of the oak and use compatible adhesives that can withstand the temperature fluctuations.

Is the height adjustable?

No, the profile is fixed at 20mm. If your height difference is smaller, you may need to shim the subfloor underneath the threshold.

What is the best way to attach this to a concrete floor?

A construction-grade, flexible wood-to-concrete adhesive is recommended for a clean, nail-free finish.

Does the oak need to be acclimatized?

Yes, we recommend leaving the threshold in the room where it will be installed for at least 24-48 hours so the wood can adjust to the ambient humidity.

Can I paint this threshold?

While it is designed for stains and oils to show the oak grain, you can use a wood primer and high-quality wood paint if you prefer a solid colour.

Troubleshooting

The threshold is slightly too long for my doorway.

Use a fine-tooth handsaw or mitre saw to trim the threshold to the required length before installation.

The wood finish looks patchy after staining.

Ensure the oak was sanded evenly with a fine-grit sandpaper (120-180 grit) before applying the stain, and always wipe away excess oil immediately.

The threshold moves or makes noise when walked upon.

Re-apply high-strength wood adhesive to the base or consider securing the threshold with discreet, countersunk screws covered by timber filler.

Pros and Cons

Pros

  • Durable solid oak construction
  • Fully customizable finish
  • Provides a smooth, professional transition
  • Suitable for various flooring types
  • UK-milled quality

Cons

  • Requires sanding and finishing before use
  • Only one height profile (20mm) available
  • Professional installation recommended for precision cuts

Setup, Compatibility & Care

Installation should be performed using standard wood adhesives or mechanical fixings depending on the subfloor type. Ensure the area is clean and level before beginning.

  • Compatibility: Works best with hard surfaces but can be adapted for transitions to carpet using a tack strip if necessary.
  • Care: Maintain the finish by regularly dusting with a dry cloth. Avoid harsh chemical cleaners. If the surface is lacquered, re-apply a polish periodically to maintain the barrier. Keep the threshold away from direct, prolonged heat sources to prevent the natural oak from splitting.

Price History

DatePrice
Visit shop