Setup, Compatibility & Care Instructions
Setup:
- Ensure the vacuum is unplugged before assembly or cleaning.
- Attach the suction hose to the vacuum inlet port.
- Connect the desired accessory (e.g., floor brush, crevice tool) to the other end of the suction hose.
- If vacuuming dry debris, insert the appropriate filter (cloth or dust bag). If vacuuming liquids, ensure the foam filter is in place and the dust bag is removed.
- Check that the tank is securely fitted.
- Plug in the vacuum and power it on.
Compatibility:
This vacuum is designed for use with Draper vacuum systems. While it includes a standard 3-pin UK plug, it is recommended to confirm compatibility with your specific Draper vacuum model before use, especially regarding hose and accessory fittings. The brush head itself is a component, not a standalone vacuum.
Care:
- After Each Use: Empty the tank. If used for dry vacuuming, empty the dust bag or clean the cloth filter. If used for wet vacuuming, dry the tank thoroughly.
- Filters: Clean the foam filter regularly with water and allow it to dry completely before re-insertion. Replace cloth filters or dust bags when they become excessively dirty or damaged.
- Hose and Accessories: Check the suction hose and accessories for blockages and clean them as needed. Use a damp cloth to wipe down the exterior of the unit and the tank.