This solar pool film sits directly on the water surface, inside your pool's edges, and can thereby...This solar pool film sits directly on the water surface, inside your pool's edges, and can thereby raise the temperature of your pool water by up to 1°C, depending on the amount of direct sunshine. With PE bubbles all over its surface, the heat is contained much longer. It is the least expensive way to heat your swimming pool. At the same time, it helps reduce chemical consumption, as well as water evaporation. It is easily tailored to fit smaller sized pools. Being lightweight, installing and handling is very easy. Warning: This product is not a safety cover and does not prevent drowning. Children must be constantly supervised when using or being near the pool. Ensure that the pool installation complies with all applicable local and national safety regulations to reduce the risk of drowning. Colour: Black and blue Material: Thick PE film with air chambers Size: 600 x 400 cm (L x W)Thickness: 110 micrometer (extra thick, high quality)
This VIDAXL solar pool cover is designed for pool owners seeking an economical way to increase water temperature and reduce chemical and water loss. It effectively raises pool temperature by up to 1°C with direct sunlight and minimizes evaporation and chemical usage. While it offers significant benefits, it's crucial to remember this is not a safety cover and requires constant adult supervision around the pool.
All features
Brand
VIDAXL
Extended Product Information
FAQs
How much does this cover actually heat the pool?
The cover can raise the pool water temperature by up to 1°C, depending heavily on the amount of direct sunshine and ambient temperature.
Will this cover prevent my pool from freezing?
No, this cover is designed for heating and reducing evaporation, not for freeze protection.
Is this cover a safety device?
No, this product is not a safety cover and does not prevent drowning. Constant adult supervision is required when children are near the pool.
How do I clean the cover?
Clean the cover with a soft brush or cloth and clean water. Avoid abrasive materials or harsh chemicals.
Can I cut the cover to fit my pool?
Yes, the cover is made of PE film and can be easily cut with scissors to fit smaller or uniquely shaped pools.
What is the thickness of the cover?
The cover is 110 micrometers thick, which is described as extra thick and high quality.
How does it reduce chemical consumption?
By sitting on the water's surface, it creates a barrier that reduces the rate at which chemicals evaporate or dissipate from the pool water.
Troubleshooting
Pool water not warming up significantly.
Ensure the cover is laid flat on the water surface with the PE bubbles facing down. Maximize direct sunlight exposure. Check if ambient temperature or cloud cover is limiting solar gain. The cover is most effective on clear, sunny days.
Cover is difficult to handle or deploy.
Ensure the cover is completely dry before attempting to fold or unfold. Handle carefully, especially in windy conditions. For larger pools, having two people may assist.
Excessive chemical smell from the cover.
Rinse the cover thoroughly with clean water before first use and after prolonged storage. Ensure adequate pool ventilation if chemical levels seem high.
Cover shows signs of wear or small tears.
Inspect the cover for damage regularly. Small punctures can sometimes be repaired with appropriate waterproof tape, though this may affect heating efficiency. Avoid dragging the cover over rough surfaces.
Pros and Cons
Pros
Economical pool heating solution.
Reduces water evaporation and chemical loss.
Easy to install, remove, and store due to lightweight design.
Durable and thick PE material for extended use.
Can be cut to size for a custom fit.
Environmentally friendly heating method.
Cons
Effectiveness depends on direct sunlight and ambient temperature.
Not a safety cover and does not prevent drowning.
Requires regular cleaning to maintain efficiency.
May not be suitable for very large pools if temperature increase is critical.
Can be cumbersome to handle in windy conditions before fully deployed.
Setup, Compatibility & Care
Setup:
Unfold the cover carefully. Ensure the side with PE bubbles faces down towards the water.
Gently lay the cover flat on the water's surface, ensuring it sits inside the pool's edges.
If necessary, use clean scissors to trim the cover to fit smaller or uniquely shaped pools. Ensure the cut edges are smooth.
Compatibility:
Suitable for most types of swimming pools, including above-ground and in-ground pools.
Works best when the pool is not in use and exposed to direct sunlight.
Care:
Clean the cover regularly with a soft brush or cloth and clean water. Avoid harsh chemicals or abrasive materials.
Allow the cover to dry completely before storing to prevent mold or mildew.
Store in a cool, dry place away from direct sunlight when not in use.
Important Warning: This product is not a safety cover. Children must be supervised at all times when near the pool. Ensure pool safety regulations are followed.