NGT Carp Coarse Fishing Twin VX2 Bite Alarm and Bobbin Indicator Set - Angling Pursuits - VX2

Locate the power switch on the alarm unit and switch it to the 'on' position.

The set comes with the batteries included, but replacements will be needed over time. The battery type will be specified in the product description.

The VX2 set has a straightforward setup, with the controls on the alarm unit. Review the product manual for detailed adjustments.

The alarms are designed to withstand moisture. However, excessive exposure to heavy rain should be avoided. Ensure the set is thoroughly dried after use in wet conditions.

Use a damp cloth to wipe down the exterior of the alarms and bobbins. Avoid using harsh chemicals or abrasive cleaners.

Please refer to the product packaging or your point of purchase for warranty information.

Check your line for any obstruction or tangles, and reel in the line slowly to identify the cause. Ensure that there is no debris that could be triggering a false alarm.

Check that the alarm is switched on. Replace batteries if necessary. Ensure the line is correctly positioned in the alarm.

Adjust the line clip tension on the bobbin. Ensure there is no snag on the line.

Replace the batteries. Check the volume setting (if applicable).

If the alarm is exposed to water, dry it off as soon as possible and allow it to air out completely. If the problem persists, contact support.