Osmo Polyx-Oil Tints - 3071 Honey - 5ml

It dries to the touch in approximately 4-6 hours. Full drying and curing for heavy use takes around 24 hours. Overnight drying is recommended before placing furniture.

Yes, it is suitable for interior and exterior wood surfaces, providing protection against weather and wear.

Typically, one to two thin coats are sufficient. For a deeper color or enhanced protection, a second coat can be applied after the first has dried to the touch.

Coverage varies depending on the wood type and application method, but generally, one liter covers approximately 12-18 square meters with a single coat.

Clean tools immediately after use with a solvent like white spirit or turpentine.

Yes, Osmo Polyx-Oil Tint colors can be mixed together to create custom shades.

No, Osmo Polyx-Oil penetrates the wood, creating a micro-porous, breathable finish rather than a surface film.

This often occurs if excess oil is not fully buffed off. Ensure to remove all residue with a clean cloth. For existing issues, light sanding and reapplication may be needed.

Indicates too much oil was applied or not enough excess was removed. Buff vigorously with a clean cloth, or apply a fresh coat thinly and buff thoroughly.

The surface may not have been fully cured or an adequate number of coats were not applied. Allow for full curing time. If necessary, reapply the oil following correct procedures.

Test the oil on an inconspicuous area first. Wood type and the number of coats applied can affect the final color. A second coat can deepen the shade.