Best current price£10.99from eBay
Shopping.co.uk recommended and popular offers
eBay£10.99Visit shop 1x Bartoline PP2251 Direct To Rust Satin Ivory White 400mL Rustproof Spray Paint
Visit shop
Amazon£11.08Visit shop Bartoline Direct to Rust Satin Ivory White Spray Paint 400ml – No Primer Metal Paint, Rust Protection Aerosol, Weather & UV Resistant for Gates, Furniture & Railings
Visit shop5 offers from £10.99 - £12.99
View price history by clicking the chart icon.
Bartoline Direct to Rust Spray Paint is an ideal solution for homeowners and DIY enthusiasts looking to restore metal, wood, plastic, or ceramic surfaces without the labor-intensive process of priming. Its key benefit is the ability to bond directly over existing rust, providing a durable, satin ivory white finish that resists weather and UV damage; however, users should be aware that it requires a temperature-controlled environment and a full 72-hour curing time to reach maximum hardness.
| Colour | White |
|---|---|
| Model Part Number | PP2251 |
| Brand | Bartoline |
You do not need to sand to bare metal, but you must remove loose rust deposits with a wire brush for optimal adhesion.
Yes, this product is formulated for use on plastic, as well as metal, wood, and ceramics.
While it is recoatable in 15-20 minutes, you should allow up to 72 hours for the paint to fully cure and reach maximum hardness.
Yes, but you must ensure the area is well-ventilated to allow fumes to escape.
No, direct sunlight can interfere with the drying process and the final finish quality. Work in a shaded area.
Store the can in a cool, dry place, ensuring the nozzle has been cleared after the last use.
Invert the can and spray for 5 seconds. If still blocked, soak the nozzle in a suitable solvent or replace it.
The spray distance is likely too close or you are applying too much paint at once. Hold the can 15-25cm away and apply thinner coats.
High humidity or temperatures below 15°C may delay drying. Move the item to a warmer, drier area.
Before application, ensure the target surface is completely clean and free of loose debris by using a wire brush. The ambient temperature should remain between 15°C and 25°C; avoiding direct sunlight during the drying process is critical to prevent premature skinning of the paint. To prepare the can, shake it vigorously for at least 2 minutes, and continue to agitate it intermittently during use. After finishing your project, always invert the can and spray for 2-5 seconds; this clears the nozzle and prevents the internal tube from clogging for future use. Store the canister in a cool, dry area away from heat sources.
