Best current price£12.19from Debenhams
Shopping.co.uk recommended and popular offers
Debenhams£12.19Visit shop Living And Home Unisex White 10Pcs Pvc Lattice Peel And Stick Wall Tile Sticker For Bathroom, Kitchen & Living Room In
Visit shop4 offers from £12.19 - £22.17
View price history by clicking the chart icon.
This Living and Home Wall Tile Sticker is designed for homeowners looking to quickly and easily refresh any room's aesthetic. Its key benefit is providing a sophisticated, modern look with a geometric lattice pattern that is simple to apply and remove without damaging walls. A potential caveat is that suitability may vary on textured or uneven surfaces. This product offers an elegant, DIY-friendly solution for accent walls, backsplashes, and decorative projects, crafted from high-quality PVC.
| Colour | White |
|---|---|
| Pattern | Geometric |
| Model Part Number | 0747674407932 |
| Brand | Living and Home |
The wall sticker is made from high-quality PVC material.
Yes, the sticker is designed to be removed without leaving residue or damaging most painted surfaces.
It is best applied to smooth, non-porous surfaces like painted drywall, glass, metal, and smooth wood. Avoid highly textured or freshly painted walls.
Wipe gently with a soft, damp cloth. Do not use abrasive cleaners or chemicals.
Yes, it can be used in kitchens and bathrooms, especially for backsplashes, provided the surface is smooth and clean. Ensure good ventilation in very humid areas.
The product information does not specify if it can be painted over. For best results and to maintain the intended finish, painting is not recommended.
Product specifications regarding the exact dimensions of the sticker or roll are not provided in the product description.
Ensure the surface is clean, dry, and smooth. For textured walls, consider using a primer or a product designed for such surfaces. Make sure there are no air bubbles trapped underneath.
Gently lift the edge of the sticker where the bubble is located and reapply the sticker, smoothing it down firmly from the center outwards. A pin can be used to pop small bubbles, then smooth the area.
Gently heat the sticker with a hairdryer on a low setting to soften the adhesive. Peel slowly and carefully at a shallow angle. If residue remains, use a mild adhesive remover or a damp cloth.
Carefully measure and plan your layout before application. Overlap edges slightly if designed to do so, or use a craft knife to trim precisely for a seamless look.
Setup: Ensure the wall surface is clean, dry, and smooth before application. Peel the backing paper away gradually as you apply the sticker, smoothing it onto the wall with your hands or a soft cloth to avoid air bubbles. For best results, start from the center and work outwards.
Compatibility: This sticker is best suited for smooth, non-porous surfaces such as painted drywall, glass, metal, and smooth wood. It may not adhere effectively to rough, textured, or freshly painted walls (allow fresh paint at least 4 weeks to cure).
Care: Clean the sticker with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the surface or the adhesive. If you need to reposition the sticker, carefully peel it back slowly and reapply.
