Deda Elementi Spare Stem Bolt - Black - M5x18MM

This M5 x 18MM bolt is specifically designed as a spare part for the Deda Elementi Zero1 and Zero2 stems.

The bolt has an M5 thread size and is 18mm in length.

While it is an M5 size, it is designed for specific Deda Elementi stems. Using it on other brands may not provide a secure fit or could damage the components. Always check compatibility with your specific stem.

You should replace a stem bolt if it is stripped, rusted, corroded, bent, or shows any signs of wear or damage. Also, replace it if it has been lost.

Typically, an Allen key (hex wrench) is required. The specific size for an M5 bolt is usually 4mm, but always confirm with the manufacturer's specifications.

It's generally recommended to use a light grease or anti-seize compound on the threads for easier installation and removal. Avoid strong threadlockers unless specifically instructed by the manufacturer, as they can make future removal difficult.

Torque specifications are usually found in the manual that came with your Deda Elementi stem or on the manufacturer's official website. If unsure, consult a professional bike mechanic.

Check for cross-threading. Ensure the bolt and the threaded hole are clean and free of debris. Verify that you are using the correct M5 thread pitch. Do not force the bolt.

Ensure the bolt has been tightened to the manufacturer's recommended torque specification. Check that the bolt length (18mm) is appropriate for the stem's clamping mechanism. Verify the stem itself is correctly seated.

Use a bolt extractor tool if possible. If not, professional assistance from a bike shop may be required. Replace the bolt immediately if damaged to prevent further issues.