Light up your next adventure with the Knog Blinder Pro 400 And Plus Light Set. Up front, the Blind...Light up your next adventure with the Knog Blinder Pro 400 And Plus Light Set. Up front, the Blinder Pro 400 blasts out an 18° focused beam, with six lighting modes to match your mood and mission. Plus, the smart LED indicators let you know exactly how much juice you've got left. On the rear, the Plus Light brings six modes of its own, from attention-grabbing strobes to long-lasting settings. Being Knog's most versatile rear light, you don't have to just mount it to your seat post - You can also clip it to your bag, jersey or wherever that will keep you visible on the roads. Whether you're flying down country roads or cruising on your commute, the Knog Blinder Pro 400 And Plus Light Set is your ticket to safer, more stylish rides. Features: Front & Rear Lights: - Tool-free mounting system for easy installation and removal - Multiple light modes (including steady and flash) - USB rechargeable with built-in plugs - Low battery indicator - Compact, lightweight design ideal for all bike setups Front Light: - 400-lumen front light with focused 18° beam - Daylight-coloured front LED reduces eye fatigue during night riding Rear Light: - Mounts to seat post or clips onto clothing or gear Materials: Front & Rear Lights: - Rugged composite nylon body for durability - Bulb Type: Chip On Board (COB) LEDs Specifications: Front & Rear Lights: - Rugged composite nylon body for durability - IP66 Watreproof Rating - Fits Seat Posts 22 – 32mm+ diameter Front Light: - 400 Lumen Output - Built-in 1850mAh rechargeable battery - Dimensions: H: 84 mm x W: 32 mm x L: 32 mm - Weight: 90gm - High Steady Mode: 400 Lumens at 2.5hrs runtime - Medium Steady Mode: 200 Lumens at 5hrs runtime - Low Steady Mode: 100 Lumens at 9hrs runtime - Pulse Flash Mode: 150 Lumens at 9hrs runtime - Strobe Flash Mode: 150 Lumens at 11hrs runtime - Eco Mode: 100 Lumens at 70hrs runtime Rear Light: - 20 Lumen Output - Dimensions: H: 66 mm x W: 24 mm x L: 14 mm - Weight: 17gm - Straps: Small (22 - 32 mm) & Large (Up to 200 mm) included - Steady Mode: 20 Lumens at 2hrs runtime - Stobe Mode: 20 Lumens at 8.5hrs runtime - Pulse Mode: 20 Lumens at 4.5hrs runtime - Fancy Flash Mode: 20 Lumens at 10hrs runtime - Eco Flash Mode: 20 Lumens at 40hrs runtime
The Knog Blinder Pro 400 And Plus Light Set is designed for cyclists seeking enhanced visibility and safety during day and night rides. Its key benefit is the powerful 400-lumen front light with a focused beam and versatile rear light with multiple modes. A potential caveat is the need for regular USB charging to maintain optimal performance across all modes.
All features
Material
Nylon
Model Part Number
KNG13384
Brand
Knog
Extended Product Information
FAQs
How long does the battery last on the front light?
The front light's battery life varies by mode, ranging from 2.5 hours on High Steady (400 lumens) to 70 hours on Eco Mode (100 lumens).
How long does the battery last on the rear light?
The rear light's battery life varies by mode, ranging from 2 hours on Steady Mode (20 lumens) to 40 hours on Eco Flash Mode (20 lumens).
Can I use the lights while they are charging?
The product information does not specify if the lights can be used while charging. It is generally recommended to charge devices when they are powered off for optimal battery health.
What is the waterproof rating of the lights?
Both the front and rear lights have an IP66 waterproof rating, meaning they are protected against dust ingress and high-pressure water jets.
How do I switch between lighting modes?
Briefly press the power button on each light to cycle through its available lighting modes.
What is the beam angle of the front light?
The front light features a focused 18° beam angle.
What sizes of seat posts/handlebars do the included straps fit?
The included straps are designed to fit seat posts and handlebars between 22mm and 32mm in diameter. Larger straps are included for the rear light to accommodate sizes up to 200mm.
Troubleshooting
Light not turning on
Ensure the light is charged. Press and hold the power button for a few seconds. If the issue persists, try charging the light and then attempting to power it on again.
Light not charging
Check that the USB connection is secure and that the power source is functioning. Ensure the charging port on the light is clean and free of debris. Try a different USB cable and power source.
Inconsistent brightness or flickering
This may indicate a low battery. Charge the light fully. If the problem continues, it could be a mode setting or a potential internal issue.
Mounting strap not secure
Ensure you are using the correct strap size for your handlebar or seat post. Check that the strap is properly engaged and tightened.
Pros and Cons
Pros
Provides excellent visibility with a powerful front light and adaptable rear light.
Multiple lighting modes cater to diverse riding environments and battery life requirements.
Tool-free mounting system simplifies installation and removal.
USB rechargeable for convenience.
Durable and waterproof construction for reliable use.
Versatile mounting options for the rear light.
Cons
Requires regular charging to maintain full functionality.
The 18° focused beam on the front light might be too narrow for some riders preferring wider illumination.
The rear light's 20-lumen output may be less impactful in very bright daylight conditions compared to higher-lumen rear lights.
Setup, Compatibility & Care
Setup:
Attach the lights to your bike using the integrated tool-free mounting straps. Ensure the front light is securely fastened to handlebars and the rear light to the seat post or other desired location.
Select the appropriate strap size for your handlebar or seat post diameter.
Press and hold the power button on each light to turn it on/off.
Cycle through the modes by pressing the power button.
Compatibility:
The front and rear lights are compatible with handlebars and seat posts ranging from 22mm to 32mm in diameter. Larger straps (up to 200mm) are included for the rear light to accommodate larger seat posts or frames.
The lights are USB rechargeable, compatible with standard USB power sources.
Care:
Clean the lights periodically with a soft, damp cloth. Avoid abrasive cleaners.
Ensure the USB charging port is dry before plugging in a power source.
Store in a cool, dry place when not in use.
Check the IP66 rating to understand its resistance to dust and water ingress.