SupaDec Long Pile Paint Roller Sleeve (Pack of 10) - White

This SupaDec Long Pile Paint Roller Sleeve is specifically designed for use with emulsion paints.

The roller sleeve is 4 inches in length.

Each pack contains 10 SupaDec Long Pile Paint Roller Sleeves.

While it might be possible, the sleeve is optimized for emulsion paints. Performance with oil-based paints is not guaranteed, and cleaning would require appropriate solvents.

For emulsion paints, rinse thoroughly with warm water until all paint residue is gone. Allow it to air dry completely.

The long pile is ideal for medium to textured surfaces, providing good coverage and minimizing roller marks on these types of finishes.

With proper care and cleaning, these durable woven sleeves can be reused multiple times, especially for emulsion paint projects.

Ensure the sleeve is fully dry before use. For initial use, you can 'de-lint' by lightly rolling it over masking tape or a stiff brush before painting. Check that the sleeve is compatible with the type of paint being used.

Ensure the sleeve is adequately loaded with paint but not overloaded. Apply paint with consistent pressure and overlapping strokes. Check that the surface is properly prepared and free from debris.

Verify that you are using a standard 4-inch roller frame. The sleeve is designed for this size. Ensure the sleeve is fully pushed onto the frame's spindle.

Ensure the sleeve is clean and dry. If using emulsion paint, ensure the paint is not too thick; if necessary, thin according to the paint manufacturer's instructions. The long pile should hold paint well, so check for any blockages in the fibers.