Best current price£2.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£2.99Visit shop Invena Men's Brass 1/2 X 3/8 Inch Bsp X Fe Thread Pipe Reduction Nipple Union Joiner Fitting
Visit shop4 offers from £2.99 - £7.99
View price history by clicking the chart icon.
This Invena pipe fitting is designed for plumbers and DIY enthusiasts working with water supply and central heating systems. Its key benefit is providing a secure and reliable connection between pipes of different sizes, specifically reducing from 3/4 inch to 3/8 inch. A potential caveat is that it is constructed from cast iron brass, which may have specific compatibility or corrosion considerations in certain environments compared to other materials.
| Brand | Invena |
|---|
The fitting is made from cast iron brass.
It has a 3/4 inch male thread on one end and a 3/8 inch female thread on the other end (BSP).
The maximum operating temperature is +100°C.
The maximum pressure rating is 1.0 MPa, which is equivalent to 10 bar.
No, this fitting is specifically designed for water supply and central heating systems, not gas lines.
Use appropriate thread sealant tape (PTFE tape) or pipe dope on the male threads and tighten securely with a wrench, but avoid overtightening.
While it can be used in outdoor plumbing, the cast iron brass material may be susceptible to corrosion from prolonged exposure to the elements. Ensure it is installed in a protected location if possible.
Check that the thread sealant tape or dope was applied correctly and sufficiently. Ensure the fitting is tightened appropriately without being overtightened. Inspect threads on both the pipe and fitting for damage.
Verify that you are using the correct BSP thread size (3/4 inch male to 3/8 inch female, or vice-versa depending on how you are connecting). Ensure the threads are clean and free of obstructions or cross-threading.
Re-check all connections for leaks. Confirm that the system pressure does not exceed the fitting's maximum rating of 10 bar.
Setup: Ensure both the 3/4 inch and 3/8 inch pipe ends are clean and free from debris. Apply appropriate thread sealant tape (PTFE tape) or pipe dope to the male threads of the fitting or the female connection as per standard plumbing practices. Screw the fitting onto the corresponding pipe connection until hand-tight, then use a wrench to tighten an additional 1-2 turns for a secure fit, taking care not to overtighten and damage the threads. Ensure the fitting is compatible with the threading standard of your existing pipes (BSP).
Compatibility: This fitting is designed for use with standard 3/4 inch and 3/8 inch BSP threaded pipes in water supply and central heating systems. It is rated for temperatures up to +100°C and pressures up to 1.0 MPa (10 bar).
Care: As this fitting is made of cast iron brass, periodic inspection for signs of corrosion or wear is recommended, especially in environments with aggressive water. Ensure connections remain tight. No specific maintenance is typically required beyond standard system checks.
