Nikwax Tech Wash - 5 Ltr

No. Regular laundry detergents contain residues that attract water and can compromise the performance of technical fabrics and their DWR treatments. Always use Nikwax Tech Wash alone in a clean washing machine dispenser.

For 1-2 items, use approximately 50ml in soft water areas and 100ml in hard water areas. Adjust the dosage based on the number of items being washed and the hardness of your water. Always check the garment's care label.

Nikwax Tech Wash cleans your gear and revitalizes its existing Durable Water Repellent (DWR) finish, helping water bead off. However, it does not *re-waterproof* a garment if its original DWR has completely worn off. For re-waterproofing, you'll need to use a separate Nikwax reproofing product (e.g., Nikwax TX.Direct) after cleaning with Tech Wash.

Yes, Nikwax Tech Wash is specifically designed and safe for all types of technical fabrics, including Gore-Tex, eVent, Pertex, and various softshell and fleece materials. It cleans without damaging the specialized membranes or coatings.

For larger items like tents, backpacks, or awnings, it is best to hand wash them in lukewarm water. Dilute Tech Wash as appropriate, gently clean the fabric, and then rinse thoroughly until the water runs clear. Drip-dry afterward.

DWR stands for Durable Water Repellent. It's a coating applied to the outer fabric of waterproof or water-resistant gear. This coating causes water to bead up and roll off the surface, preventing the fabric from becoming saturated and maintaining its breathability. Tech Wash helps to keep this coating effective.

Wash your gear with Tech Wash whenever it appears dirty, starts to 'wet out' (absorb water rather than repell it), or its breathability seems reduced. Regular cleaning helps maintain performance and prolongs the lifespan of your outdoor gear.

For heavily soiled items, pre-treat stubborn stains by applying a small amount of neat Nikwax Tech Wash directly to the affected area before washing. You may also need to increase the dosage slightly (within recommended limits for hard water areas or very large items) or consider a second wash cycle.

Nikwax Tech Wash cleans and revitalizes *existing* Durable Water Repellent (DWR) treatments. If the DWR coating is heavily worn or has been compromised over time, cleaning alone may not be enough. In this case, you will need to re-apply a separate reproofing product like Nikwax TX.Direct after cleaning with Tech Wash. Ensure garments are thoroughly rinsed after washing with Tech Wash.

This usually indicates detergent residue from previous washes in the machine's dispenser or drum, or slight overdosing. Thoroughly clean your machine's detergent dispenser before using Tech Wash. If suds persist, run an additional rinse cycle without any product.