Dylusions Ink Spray - Ranger - Vibrant Turquoise

Dylusions Ink Spray is designed for porous surfaces such as paper, cardstock, watercolor paper, canvas, Sticky Back Canvas, and wood. It can also be used on other absorbent materials.

Yes, Dylusions Ink Spray is permanent once dry. It is recommended to test your application method on a scrap piece of material first.

While the ink is wet, it can be cleaned up with water. Once dry, it becomes permanent and may require more effort or specific solvents to remove, depending on the surface.

Yes, you can layer different colors. Ensure each layer is dry before applying the next for best results and to prevent colors from muddying.

The fine mist spray can clog if not properly maintained or if the ink settles. Shaking the bottle before use and cleaning the nozzle after use can help prevent clogging.

When stored properly away from extreme temperatures and direct sunlight, Dylusions Ink Spray typically has a long shelf life. Ensure the cap is always securely replaced after use.

The ink is non-toxic, but it is recommended for use by adults or under adult supervision due to the spray mechanism and permanent nature of the ink. Always follow safety guidelines and use in a well-ventilated area.

Remove the nozzle and rinse gently under warm water. Ensure all ink residue is removed. If persistent, soak the nozzle tip in water for a few minutes. Dry thoroughly before reattaching. Shake the bottle well before spraying.

Ensure the bottle has been shaken thoroughly before use, as the pigment can settle. Apply additional layers of ink spray to build up color intensity. Verify that the surface being used is sufficiently porous to absorb the ink.

The surface may not be porous enough. Try using a different material or preparing the surface with a gesso or primer. Ensure the surface is clean and free of oils or residues.

Shake the bottle vigorously again. Ensure the nozzle is held at an appropriate distance from the surface for a fine mist. Check for any obstructions in the nozzle by cleaning it as described above.