Garage Floor Tile Company Interlocking Floor Tiles - X500/7
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
These 7mm thick interlocking PVC floor tiles are designed for heavy-duty use in garages, workshops, and gyms, offering a tough, reliable surface that's easy to install over existing floors without glue or special tools. Their key benefit lies in providing robust protection, insulation from cold and damp, and resistance to chemicals and impacts. A potential caveat is the need for a rubber mallet for installation, and ensuring the subfloor is relatively level for optimal interlocking.
All features
| Model Part Number | X500/7 |
|---|---|
| Brand | Ecotile |
Extended Product Information
FAQs
Do I need a special subfloor for these tiles?
No, these tiles are designed to be laid over most existing solid surfaces, including concrete, wood, and old vinyl. The subfloor should be relatively clean and free from large debris.
Can I install these tiles myself?
Yes, installation is designed to be simple. You only need a rubber mallet to tap the tiles into place. No glue or special tools are required.
How thick are the tiles?
The tiles are 7mm thick, providing excellent durability and protection.
Are these tiles suitable for a garage with cars?
Yes, they are specifically designed for garage flooring and can withstand vehicles, machinery, and impact.
Can I move or reuse these tiles?
Absolutely. The interlocking design allows you to easily lift, move, and reuse the tiles as needed, making them suitable for temporary or permanent installations.
What is the slip resistance rating?
The tiles have an R10 slip resistance rating, offering good grip on the surface.
How do I clean the tiles?
Sweep or vacuum regularly. For deeper cleaning, use a mop with warm water and a mild detergent. Avoid harsh solvents.
Are the tiles environmentally friendly?
The tiles are made with 50% recyclable material.
Troubleshooting
Tiles won't interlock securely.
Ensure the edges are clean and free from obstruction. Use a rubber mallet to firmly tap the edges together, ensuring the interlocking tabs fully engage. Check that the subfloor isn't excessively uneven in that spot.
Gaps appearing between tiles.
This can happen if tiles were not fully tapped into place. Go over the floor with a rubber mallet, ensuring all connections are tight. Check for any debris trapped in the joints.
Difficulty cutting tiles.
Use a sharp utility knife or a fine-tooth saw. Score the tile multiple times for a cleaner cut. Ensure the tile is well-supported during cutting to prevent cracking.
Floor feels slightly uneven after installation.
Most of this is due to the subfloor. For optimal results, ensure the subfloor is as level as possible. Minor unevenness can be addressed by a more thorough tapping with the rubber mallet.
Pros and Cons
Pros
- Quick and easy DIY installation without special tools or adhesives.
- Excellent protection for existing subfloors against heavy use.
- Improves workshop/garage environment by blocking dust, cold, and damp.
- Durable and resistant to chemicals and impacts.
- Tiles are modular and can be repositioned or reused.
Cons
- Requires a rubber mallet for proper installation.
- Initial cost might be higher compared to paint or thin mats.
- Can be heavy to move in large quantities due to weight per m².
- While offering insulation, they may not provide significant thermal warmth.
- A very uneven subfloor might still pose fitting challenges without preparation.
Setup, Compatibility & Care
Setup:
- Ensure the existing subfloor is relatively clean and free from large debris. Minor imperfections are generally acceptable.
- Begin laying tiles from a corner or edge, pushing them together.
- Use a rubber mallet to gently tap the edges of each tile, ensuring a tight and secure interlock with the adjacent tiles.
- Continue laying tiles, working across the area, using the mallet to secure each new connection.
- Cut tiles as needed for edges or around obstacles using a suitable cutting tool (e.g., a sharp utility knife or jigsaw, with appropriate safety measures).
Compatibility:
- Designed to be laid over most existing solid surfaces including concrete, wood, and old vinyl.
- Not recommended for direct installation over loose gravel or soft earth.
Care:
- Regular sweeping or vacuuming will remove loose dirt and debris.
- For deeper cleaning, use a mop with warm water and a mild detergent. Avoid harsh solvents or abrasive cleaners.
- Wipe up spills immediately to prevent staining or damage.