connektgear CAT5e Network Cable - 10m - Black

CAT5e (Category 5e) is an updated version of the CAT5 standard for Ethernet cables. It supports higher performance for data cabling systems, commonly used for Gigabit Ethernet (10/100/1000 Mbps).

UTP stands for Unshielded Twisted Pair. It means the cable consists of pairs of insulated wires twisted together to reduce interference, but there is no additional metallic shielding around the pairs.

No, CAT5e cables are generally rated for up to 1 Gigabit Ethernet. For 10 Gigabit Ethernet, you would typically need CAT6a or CAT8 cables.

A stranded conductor is made up of multiple smaller wires twisted together to form a single conductor. This makes the cable more flexible and resistant to bending than solid-core cables, which are made from a single solid wire.

A snagless boot is a protective cover over the RJ-45 connector that prevents the locking tab from catching on other cables or obstructions when plugging or unplugging, making installation easier.

This specific connektgear cable is 10 meters long.

The cable is black.

Ensure both ends of the cable are securely plugged in. Check if the LEDs on the network ports are lit. Try a different port on your router or switch. Test with another known-working cable.

Verify that both the connected device and the network infrastructure support Gigabit speeds. Check for physical damage to the cable or connectors. Ensure the cable is not being used for distances exceeding optimal CAT5e specifications (though 10m is well within limits).

Inspect the cable for any signs of damage, kinks, or fraying. Ensure connectors are clean and fully seated. Avoid running the cable near sources of strong electromagnetic interference (e.g., power cords, microwaves).