Best current price£5.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.99Visit shop B&Q - Simpson Strong Tie Double Sided Timber Connectors Galvanised50mmM12 Dstc50C50
Visit shop2 offers from £5.99
View price history by clicking the chart icon.
The Simpson Strong-Tie DSTC50C50 Double Sided Timber Connector is designed for builders and DIY enthusiasts needing a robust solution for joining timber. Its primary benefit is providing a strong, durable, and dependable timber-to-timber connection. A key consideration is ensuring it's used with appropriate M12 fixings for optimal performance. This toothed plate connector is constructed from mild steel with a galvanised finish, ensuring longevity and resistance to corrosion.
| Colour | Silver |
|---|---|
| Model Part Number | DSTC50C50 |
| Brand | Simpson Strong-Tie |
The DSTC50C50 is designed for use with M12 fixings. It is recommended to use appropriate bolts or screws specifically rated for structural applications.
No, this connector is specifically designed for joining timber to timber.
The '50mm' typically refers to the overall size or a key dimension of the connector plate itself, indicating its scale and suitability for certain timber sizes.
Yes, the galvanised finish provides good resistance to corrosion, making it suitable for many outdoor applications. However, performance can vary based on environmental conditions.
Ensure the connector is properly aligned, the teeth are well-embedded into both timber members, and all fasteners are tightened securely. Using the connector on both sides of the joint also significantly increases strength.
While you can paint or coat the connector, ensure the surface is clean and any paint or coating used does not compromise the structural integrity or the protective qualities of the galvanised finish.
Ensure that M12 fasteners are fully tightened, drawing the timber tightly against the connector teeth. Verify that the timber surfaces are flat and that the connector is correctly aligned.
Ensure the timber is dry and not excessively hard. If the timber is very dense, pre-drilling pilot holes slightly smaller than the teeth may help, though this can reduce holding power. Ensure the connector is placed accurately before applying fastening pressure.
While the galvanised finish offers protection, prolonged exposure to highly corrosive environments can still affect it. Minor surface rust can often be cleaned. For significant corrosion, the integrity of the connection should be assessed by a professional.
Setup: To install the Simpson Strong-Tie DSTC50C50, position the connector over the joint where two timber members meet. Ensure the teeth are aligned to embed into both pieces of timber. Secure the connector using appropriate M12 fasteners (e.g., bolts, screws) through the pre-drilled holes or designated areas, ensuring they are tightened sufficiently to draw the timber together and engage the teeth.
Compatibility: This connector is specifically designed for timber-to-timber applications and is compatible with M12 fixings. It is intended for use with standard dimensional lumber.
Care: The galvanised finish provides inherent corrosion resistance. To maintain its condition, avoid abrasive cleaners. Periodically inspect the connection for any signs of damage or corrosion, especially in harsh environments. Clean with a damp cloth if necessary.
