Spectrum OX Trade Dry Diamond Tile Drill Bit - 6mm

This drill bit is designed for use on porcelain, marble, granite, and ceramic tiles.

No, this drill bit is designed for dry drilling and has a self-lubricating wax core, eliminating the need for water.

This drill bit is compatible with most standard drills, including cordless models, with a universal chuck fitting.

Start at a slight angle to create a starting point, then bring the drill to a 90-degree angle to the tile.

Apply gentle, steady pressure. Let the diamond tip do the work; do not force the bit.

Use a moderate speed setting on your drill. High speeds can overheat the bit and damage the tile.

Avoid excessive pressure. If the wax core is depleted, replace the bit. Ensure the bit is stored in a dry place.

Check your speed, pressure, and angle. Make sure the bit is sharp and in good condition. If the wax core is depleted, replace the bit.

Check the drill speed and pressure. Ensure you are using a moderate speed and not applying too much pressure. Also, check for any obstructions and make sure the bit is not dull. If the wax core is depleted consider replacing the bit.

Reduce the pressure and the drilling speed. Ensure you are drilling at a consistent speed and angle. If the tile is particularly hard, consider using a different drilling technique.

Reduce the drilling speed and let the bit cool down. Allow the self-lubricating wax core to work, which helps reduce heat. Ensure the bit is making contact with the tile surface consistently.