Best current price£7.99from My Motor World
Shopping.co.uk recommended and popular offers
My Motor World£7.99Visit shop Rocket Tt Yellow Add It Silicone Spray 400Ml
Visit shop
B&Q£12.99Visit shop B&Q - Add It Silicone Spray 400Ml Anti-Friction Lubricant Spray Rsl400
Visit shop
eBay£14.79Visit shop Rocket TT Silicone Spray 400 ml – Water-Resistant Lubricant 400 milliliters
Visit shop14 offers from £7.99 - £31.99
View price history by clicking the chart icon.
The Rocket TT Add It Silicone Spray 400ml is designed for anyone looking to reduce friction, protect surfaces, and extend the life of moving parts across automotive, household, garden, and workshop applications. Its key benefit is providing long-lasting lubrication and a protective barrier against moisture and corrosion without staining. A potential caveat is the need for proper ventilation during use due to its aerosol nature.
| Model Part Number | RSL400 |
|---|---|
| Brand | Rocket TT |
While it can be used on rubber components, it is not specifically formulated as a tire dressing. It's best used on non-driving rubber parts like seals and trim to prevent cracking.
The non-staining formula is designed to provide a dry lubricant finish, which generally does not attract excessive dust or dirt compared to oil-based lubricants.
Reapplication frequency depends on the application and environmental conditions. For areas exposed to significant wear or weather, reapplication every few months is recommended. For less demanding uses, a yearly application may suffice.
Yes, the non-staining formula is generally safe for painted surfaces. However, always test in an inconspicuous area first to confirm compatibility, especially with non-standard or aged paint finishes.
It can be used on plastic and rubber parts of electrical casings or connectors, but avoid spraying directly onto active electrical contacts or circuitry as it may interfere with conductivity.
When stored correctly in a cool, dry place away from direct sunlight, the product typically maintains its efficacy for several years. Check the can for any manufacturing or expiry date codes.
Remove the nozzle and soak it in warm water. Gently clear any debris with a fine needle or pin. Ensure it is dry before reattaching.
Shake the can more vigorously and ensure it is held at the correct distance from the surface. Try spraying in shorter bursts.
Wipe away excess product immediately after application with a clean, dry cloth. For dried residue, use a mild detergent and water, or a solvent suitable for the surface if necessary.
Ensure the can is properly seated on the nozzle. If the can is new, check if the safety seal has been removed. If the can is old, it may be empty or the internal mechanism may be faulty.
Setup: Shake the can well before use. Hold the can upright and spray from a distance of 6-10 inches (15-25 cm) directly onto the surface or component requiring lubrication or protection. Ensure the area is clean and dry before application for best results. Use in a well-ventilated area.
Compatibility: This silicone spray is designed for use on a wide range of materials including plastics, metals, and rubber. It is generally safe for most automotive, household, and workshop materials. Avoid use on surfaces where adherence is critical or where a greasy film is undesirable. Always test on an inconspicuous area first if unsure.
Care: Store the can in a cool, dry place away from direct sunlight and heat sources. Keep out of reach of children. Dispose of the empty can according to local regulations for aerosol products.
