Woodside Automatic Electronic Water Timer - Green

The timer requires 2 x AAA batteries.

Use the control panel to select the desired watering time from the available options (1, 3, 5, 10, 15, 20, 30, 60, 90 and 120 minutes).

You can set the frequency to 1, 2, 3, 4, 6, 8, 12, 24, 48, and 72 hours, or once a week.

The timer can handle a maximum water pressure of 80psi.

Yes, you can connect the timer to a sprinkler system as long as the system operates within the timer's pressure limits.

Wipe the exterior with a damp cloth. Clean the filter regularly to remove any debris that may cause blockages.

Check the batteries, ensure all connections are secure, and reprogram the timer. Refer to the troubleshooting section or contact customer support for further assistance.

Check the batteries and replace them if necessary. Ensure the batteries are installed correctly.

Verify that the timer is properly programmed with the correct start time and duration. Check that the faucet is fully open.

Ensure all connections are tight. Use Teflon tape on the faucet threads to create a better seal.