Flexible Hose - 3/4" Female BSP x 22mm Compression - 300mm

The hose is rated for a working temperature range of -5 to 90 degrees Celsius and a maximum working pressure of 10 Bar.

It features a durable stainless steel outer braid and a synthetic rubber inner tube.

While constructed to high standards, always verify specific product certifications for potable water use if required by local regulations.

No, this hose is supplied at a fixed length of 300mm and is not designed to be cut. Cutting would compromise the integrity of the fittings and braid.

BSP stands for British Standard Pipe, a widely used thread standard in plumbing.

This refers to a type of fitting used to connect pipes, often in heating or water supply systems, where the 22mm pipe is compressed onto a fitting to create a seal. It's commonly used with isolation valves.

Typically, compression fittings require separate olives to be purchased or may be included with the isolation valve fitting itself. Please check the product packaging or description for specific inclusions.

Ensure threads are clean and properly aligned. Tighten the connection further if possible, but avoid overtightening which can damage fittings. For compression fittings, ensure the olive is correctly seated and the nut is tightened securely.

Reposition the hose to eliminate kinks. If a kink is severe and persistent, the hose may be damaged and should be replaced to prevent failure.

Verify that you are using a 22mm pipe and the correct compression fitting components (nut and olive). Ensure the pipe end is clean and free of burrs. Lubricate the olive lightly with pipe grease if needed.