TIMCO S2 Driver Bits - PH2 x 50mm - 50 Pieces

S2 steel is a premium alloy known for its high hardness and toughness. This means the bits are more resistant to wear, chipping, and cam-out, leading to a significantly longer lifespan compared to standard chrome vanadium bits.

PH refers to Phillips head screws. The number indicates the size: PH1 is for smaller screws, PH2 is the most common size for medium screws, and PH3 is for larger screws. Using the correct size is crucial to avoid stripping the screw or damaging the bit.

Yes, the 1/4" hex shank is designed for compatibility with impact drivers and drills. The strength of S2 steel makes them well-suited for the rotational impacts of these tools.

Store the bits in a dry place. For long-term storage, especially in humid environments, a light coating of oil can help prevent rust. Keep them in their original packaging or a dedicated bit holder.

The product description does not specify magnetic properties. While many S2 bits are magnetic, it's best to check the specific product packaging or retailer information if magnetism is a requirement for your task.

This product comes in a pack of 50 pieces.

The 50mm length provides a good balance between reach for accessing slightly recessed screws and maintaining leverage and control. It's a versatile length for many common applications.

Ensure you are using the correct PH2 bit size and that it is fully seated in the screw head. Verify the bit is not worn. Check that the screw head itself is not damaged. Reduce driving torque if possible.

Ensure the 1/4" hex shank is clean and free of debris. Make sure the chuck or bit holder is functioning correctly and tightening properly.

This may indicate excessive force, improper use (e.g., using as a pry tool), or a particularly hard screw material. Inspect the screw for damage and ensure you are using the bit as intended.

Clean the bit thoroughly with a rust remover or fine steel wool. Dry completely and apply a light coat of oil for protection. Store in a dry location.