OKODOKO Replacement Backing Pad - N329079

This backing pad is designed as a direct replacement for DeWalt sanders with OEM Part Number: N329079. It is confirmed compatible with models like DWE6421 and DWE6423K, among others that share this specific OEM part number.

You need this backing pad if your current DeWalt sander's backing pad has the OEM Part Number: N329079. It's recommended to check your sander's manual or the existing pad itself for this number.

Yes, as long as the sanding disc also features a hook and loop backing system compatible with a 125mm diameter pad, it should work. The primary compatibility is with the sander itself.

Clean the pad using a soft brush or compressed air to remove dust. For tougher residue, a slightly damp cloth can be used, but avoid soaking the pad or using strong chemicals.

The diameter of this OKODOKO replacement backing pad is 125mm.

Yes, this backing pad features 8 dust extraction holes to facilitate dust collection during sanding.

Ensure the hook and loop surface of both the pad and the sanding disc are clean and free of dust or debris. Check for excessive wear on the backing pad's hook and loop system.

Verify that the backing pad's dust extraction holes are aligned with the sander's dust port and are not blocked by debris. Ensure the vacuum hose or dust bag is properly connected and not clogged.

Confirm the backing pad is securely and evenly attached to the sander. Ensure the correct OEM part number was used for compatibility and that the pad is not damaged.