Kolink Observatory HF Mesh Midi tower PC casing - Black

This case supports ATX, Micro-ATX, and Mini-ITX motherboards.

It offers two bays that can be used for either 3.5" HDDs or 2.5" SSDs, plus two additional dedicated 2.5" SSD bays.

Yes, you can install a radiator up to 360mm on the front and a 120mm radiator on the rear.

Yes, it comes with six Kolink Umbra ARGB fans: three 140mm on the front, two 120mm on the top, and one 120mm on the rear.

The case supports CPU coolers up to 160mm in height.

The ARGB lighting can be controlled via the dedicated RGB button on the I/O panel or by connecting to a 5V 3-pin ARGB header on your motherboard.

The dimensions are 200mm (Width) x 390mm (Depth) x 449mm (Height).

Yes, the case features a PSU shroud to hide the power supply and its cables for a cleaner build.

Ensure the PSU is connected and switched on. Verify the front panel power switch is correctly connected to the motherboard header. Check that the power button on the case is functioning.

Verify all fans are spinning in the correct direction for optimal airflow. Clean dust filters and fan blades. Ensure all cables are neatly managed to avoid obstructing airflow. Check if the CPU cooler is properly seated and has adequate clearance.

Confirm the ARGB cables are securely connected to the motherboard's 5V 3-pin header or the case's LED controller. Ensure the correct software or button is used for control. Check that the fan's power connection is also secure.

Double-check that the corresponding USB and HD Audio headers are correctly plugged into the motherboard. Ensure drivers for these components are installed on your operating system.

Confirm the graphics card length (up to 330mm) is within the case's specification. Ensure any drive cages obstructing the path are removed or repositioned if possible.