Setup, Compatibility & Care Instructions
Preparation:
Ensure surfaces are clean, dry, and free from dust, grease, and loose paint. For previously painted surfaces, lightly sand to create a key. For bare wood or metal, apply an appropriate primer. Stir the paint thoroughly before and during use.
Application:
Apply with a good quality brush or roller. For best results, apply two coats. Allow adequate drying time between coats, typically 2-4 hours, depending on environmental conditions. This paint is suitable for interior and exterior use.
Compatibility:
Compatible with most interior and exterior surfaces including walls, woodwork, and metalwork. It can be used on radiators and pipes. It is also suitable for updating floors, stairs, skirting boards, and kitchen units.
Care & Cleaning:
Once fully cured (allow 7 days), the painted surface can be cleaned gently with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or excessive scrubbing, as this may damage the finish.