Wessex Electrical 20A Switch - Grey

'2-gang' means the switch has two independent switching mechanisms, allowing you to control two separate circuits or lights with a single unit.

While it can be used indoors, its primary design is for outdoor and harsh environments. For standard indoor applications, a less robust switch might be more suitable.

It supports push-out knockouts for top, side, and bottom entry, and is also drillable for rear cable entry.

The switch is rated for 20 amps, making it suitable for high-current applications.

Cable glands are typically sold separately. You will need to select appropriate glands to ensure a weatherproof seal for your specific cable type.

The switch is constructed from tough, UV-stabilised polycarbonate, which is designed to resist degradation from sunlight and environmental exposure.

While rated for 20 amps, it's best to consult with a qualified electrician regarding its suitability for specific motor loads, as inductive loads have different requirements than resistive loads.

Verify that power is supplied to the circuit and that the main breaker is on. Check all wiring connections for security and correct placement. Ensure the circuit breaker has not tripped.

Inspect the wiring connections specifically for the non-functional gang. Ensure the load is within the 20-amp limit. If the issue persists, the internal mechanism may require professional inspection.

Ensure the correct size knockout has been removed or drilled. Use appropriate cable glands for a secure and weatherproof fit. Do not force cables; ensure adequate space.