Bandai Gundam Decal Set - GD-135

These decals are designed for the 1/144 scale models, specifically the "Dilanza (Guel's)" and "Daribalde" from "Mobile Suit Gundam: The Witch from Mercury" series.

These are water transfer decals, also known as water slide decals. They require application in water for best results and a painted-on look.

You will need basic tools like scissors or a hobby knife, tweezers, and cotton swabs. Using decal setting and softening solutions is highly recommended for optimal results but not strictly required.

While it's possible to use them on other models if the scale and design fit, they are specifically designed and scaled for the "Dilanza (Guel's)" and "Daribalde" 1/144 kits from "The Witch from Mercury" series.

When applied correctly and optionally sealed with a clear coat, the decals are permanent and should last the lifetime of the model.

Silvering is a phenomenon where air is trapped between the decal and the model's surface, creating a shiny, silvery appearance. Decal setting solutions help to prevent this by allowing the decal to conform tightly to the surface.

This specific set (GD-135) is for "Dilanza (Guel's)" and "Daribalde". You would need to look for other "Gundam Decal" sets, such as the "No.134" mentioned, which may cover different mobile suits or kits.

Ensure the decal has been submerged in water long enough for the adhesive to activate (usually 10-20 seconds). Try a bit more soaking time.

Handle the decal very gently with tweezers. If the decal is too soft, it may have been soaked for too long. Try to use a setting solution to help it conform and strengthen it once in place.

This is common when the decal doesn't fully adhere to the surface. Use a decal setting solution to help the decal settle into panel lines and prevent air bubbles. Gently press out any trapped air with a cotton swab.

Ensure the model surface is clean and has a suitable finish (matte or semi-gloss is best). A decal setting solution can also aid adhesion. If the surface is too glossy, a light sanding or a matte coat beforehand can help.